- dot2 User Manual
- New in the Manual
- Introduction
- Intended Use
- System Requirements dot2 onPC
- Installation of dot2 onPC
- What are...
- System Colors
- Command History
- Executor
- Values
- Background
- Programmer
- Groups
- Presets
- Tracking
- Cues
- Executors
- Chasers
- Effects
- Preview and Blind
- Network
- IPv6
- DMX Tester
- System Colors
- How to...
- Turn the console on and off
- Update the console
- Add, patch, change, and delete fixtures
- Save and load your show
- Use the command line
- Use Encoders in the onPC
- Work with groups
- Work with presets
- Work with cues
- Work with chasers
- Work with effects
- Connect nodes, wings, 3D and onPC
- Use external input triggers
- Use MIDI and MIDI Show Control (MSC)
- Use the external screen
- Use web remote
- Reset the console
- Keys
- Align
- At
- Backup
- Blind
- B.O.
- Clear
- Copy
- Cue
- Delete
- DMX
- [dot]
- Down
- Edit
- Effect
- [Encoder]
- Esc
- Exec (Executor)
- [Exec Flash]
- [Exec Go]
- Fix
- Fixture
- Flash
- Full
- Go-
- Go- (Large)
- Go+
- Go+ (Large)
- [GoFastBack] <<<
- [GoFastForward] >>>
- Goto
- Group
- Help
- Highlt (Highlight)
- Label
- If
- MA
- Macro
- Magic
- [Minus] -
- Move
- Next
- [Numeric keys]
- Off
- On
- Oops
- Page
- Page+
- Page-
- Pause
- Pause (Large)
- Please
- [Plus] +
- Preset
- Prev (Previous)
- Prvw (Preview)
- Select
- Set
- Setup
- Speed
- Store
- Thru
- Time
- Toggle
- Tools
- Up
- Update
- View [Eye]
- Views & Windows
- Control Elements
- Command Line
- Encoder Bar
- Executor Bar
- Preset Type Bar
- Title Bar
- View Bar
- Icons
- Add New Fixtures
- Backup
- Beam Preset Type
- Calculator
- Calibrate Screens
- Change Functions of Executor
- Choose Clone Method
- Choose Copy Method
- Choose Delete Method
- Choose Store Method
- Choose Update Method
- Clock
- Color Preset Type
- Command Line
- Configure Slot
- Control Preset Type
- Cues
- Dimmer Preset Type
- DMX
- Edit Cue Number(s)
- Effects
- Empty Executor
- Enter Name for
- Executor Bar
- Executor Pool
- Fixtures
- Fixture Schedule Overview
- Focus Preset Type
- Gobo Preset Type
- Global Settings
- Groups
- Help
- Import Fixture Type
- Key Backlight
- Leaving Patch & Fixture Schedule...
- Load Show
- Macros Pool
- Magic Speeds
- MIDI Configuration
- MIDI Monitor
- MIDI Show Control
- Network Interface
- Network Protocols Configuration
- Network Setup
- New Show
- Off...
- Oops
- Page Pool
- Patch and Fixture Schedule
- Position Preset Type
- Presets Pools
- Remote Inputs Configuration
- Save Show As...
- Select DMX Address...
- Select DMX Ports
- Select Fixtures ID(s)
- Select Fixture Type...
- Select Function for Remote Inputs Configuration
- Select Function of Executor
- Select Language...
- Select Session Number
- Select Station...
- Select Trig
- Select Type
- Select View
- Select View for External Screen
- Select Wing...
- Session Collision
- Settings of Executor
- Setup
- Shapers Preset Type
- Software Update via USB
- Sound Input Configuration
- Status and Messages
- System Clock
- System Information
- Time defaults
- Timecode Configuration
- Tools
- Video Preset Type
- Virtual Playbacks
- Window Settings
- Wings
- Wings & Nodes Diagnosis
- Control Elements
- Commands
- >>> [GoFastForward]
- <<< [GoFastBack]
- - [Minus]
- + [Plus]
- Assign
- At
- Black
- Blind
- Call
- Clone
- Copy
- Cue
- Default
- Delay
- Delete
- Dmx
- DmxUniverse
- Edit
- Effect
- Executor
- Fade
- Fix
- Fixture
- Flash
- Full
- FullHighlight
- Go
- GoBack
- Goto
- Group
- Help
- If
- IfOutput
- Invert
- Label
- Learn
- Macro
- MidiNote
- Move
- Off
- On
- OutDelay
- OutFade
- Page
- Park
- Pause
- Preset
- PresetType
- Preview
- Rate
- Record
- Release
- Remove
- Replace
- Select
- Selection
- SetIP
- SnapPercent
- Solo
- Stomp
- Store
- StoreLook
- SyncEffects
- Temp
- Thru
- Toggle
- Top
- Unpark
- Update
- View [Eye]
- Zero
- Hints for Operating
- Error Handling
- CrashLogCopy
- CrashLogDelete
- CrashLogList
- Error Messages
- Glossary
- dot2 Quick Start Guide
- dot2 3D
- dot2 Release Notes
Gobo Preset Type View
To go to the Gobo Preset Type View, tap Gobo in the Preset Type Bar.
- or -
Press and hold 
and press 3, for preset type 3 (= Gobo).
The gobo preset type view is only active if the selected fixture has gobo attributes.
The gobo preset type view is fragmented in the gobo views and raw gobo views (depending on the fixture type).
The gobo sliders works absolute. A tap on a gobo slider sets a new gobo value and does not follow the already set gobo values.
The respective encoders works relative to the already set gobo values.
To open the gobo effects view at screen 1 tap at the effect loop 
in the title bar.
If an effect is running on a selected fixture, the gobo preset type view change into an effect mode and get a blue effect mode title bar.
Gobo View
The gobo view is the first tab of the gobo preset type view.
In this view, you can select the gobos, gobo effects and gobo rotations, depending on the fixture type.
A selected gobo has a green frame around it.
There are several gobo buttons available, depending on the fixture type.
Select:
Tap to select a gobo from the gobowheel.
The slider change into a select gobo slider.
Spin >:
Tap to let the entire gobowheel spin clockwise.
The slider change into a select speed in rpm (revolution per minute) slider.
Stop:
Tap to stop the spinning.
Spin <:
Tap to let the entire gobowheel spin counter clockwise.
The slider change into a select speed in rpm slider.
Wheel Shake:
Tap to let the gobowheel shakes up and down.
Rotate >:
Tap to rotate the selected gobo clockwise.
The slider change into a select speed in rpm slider.
Rotate <:
Tap to rotate the selected gobo counter clockwise.
The slider change into a select speed in rpm slider.
Index:
Tap to set the index position of the selected gobo.
The slider change into a select position in degrees slider.
Raw Gobo Views
The raw gobo views are located after the gobo views.
In the raw gobo view, you control the raw gobo values in natural values (0-100) from the selected fixtures.
Encoder Bar Functions
The default encoder speed is without decimal place.
To change the encoder speed to slow, press the encoder key 
. The encoder speed is with decimal place.
To change the encoder speed to ultra slow, press and hold the 
key and press the encoder key . The encoder speed equals one DMX step.
The left upper corner of an encoder in the encoder bar, displays the attribute from the respective encoder.
The right upper corner displays the current function of the encoder, e.g. spin, select, rotation.
To select a value turn the encoder left or right.
To open the calculator, press the encoder.
Related Links