dot2 User Manual
- New in the Manual
- Introduction
  - Intended Use
  - System Requirements dot2 onPC
  - Installation of dot2 onPC
- What are...
  - System Colors
    - Command History
    - Executor
    - Values
    - Background
  - Programmer
  - Groups
  - Presets
  - Tracking
  - Cues
  - Executors
  - Chasers
  - Effects
  - Preview and Blind
  - Network
  - IPv6
  - DMX Tester
- How to...
  - Turn the console on and off
  - Update the console
  - Add, patch, change, and delete fixtures
  - Save and load your show
  - Use the command line
  - Use Encoders in the onPC
  - Work with groups
  - Work with presets
  - Work with cues
  - Work with chasers
  - Work with effects
  - Connect nodes, wings, 3D and onPC
  - Use external input triggers
  - Use MIDI and MIDI Show Control (MSC)
  - Use the external screen
  - Use web remote
  - Reset the console
- Keys
  - Align
  - At
  - Backup
  - Blind
  - B.O.
  - Clear
  - Copy
  - Cue
  - Delete
  - DMX
  - [dot]
  - Down
  - Edit
  - Effect
  - [Encoder]
  - Esc
  - Exec (Executor)
  - [Exec Flash]
  - [Exec Go]
  - Fix
  - Fixture
  - Flash
  - Full
  - Go-
  - Go- (Large)
  - Go+
  - Go+ (Large)
  - [GoFastBack] <<<
  - [GoFastForward] >>>
  - Goto
  - Group
  - Help
  - Highlt (Highlight)
  - Label
  - If
  - MA
  - Macro
  - Magic
  - [Minus] -
  - Move
  - Next
  - [Numeric keys]
  - Off
  - On
  - Oops
  - Page
  - Page+
  - Page-
  - Pause
  - Pause (Large)
  - Please
  - [Plus] +
  - Preset
  - Prev (Previous)
  - Prvw (Preview)
  - Select
  - Set
  - Setup
  - Speed
  - Store
  - Thru
  - Time
  - Toggle
  - Tools
  - Up
  - Update
  - View [Eye]
- Views & Windows
  - Control Elements
    - Command Line
    - Encoder Bar
    - Executor Bar
    - Preset Type Bar
    - Title Bar
    - View Bar
  - Icons
  - Add New Fixtures
  - Backup
  - Beam Preset Type
  - Calculator
  - Calibrate Screens
  - Change Functions of Executor
  - Choose Clone Method
  - Choose Copy Method
  - Choose Delete Method
  - Choose Store Method
  - Choose Update Method
  - Clock
  - Color Preset Type
  - Command Line
  - Configure Slot
  - Control Preset Type
  - Cues
  - Dimmer Preset Type
  - DMX
  - Edit Cue Number(s)
  - Effects
  - Empty Executor
  - Enter Name for
  - Executor Bar
  - Executor Pool
  - Fixtures
  - Fixture Schedule Overview
  - Focus Preset Type
  - Gobo Preset Type
  - Global Settings
  - Groups
  - Help
  - Import Fixture Type
  - Key Backlight
  - Leaving Patch & Fixture Schedule...
  - Load Show
  - Macros Pool
  - Magic Speeds
  - MIDI Configuration
  - MIDI Monitor
  - MIDI Show Control
  - Network Interface
  - Network Protocols Configuration
  - Network Setup
  - New Show
  - Off...
  - Oops
  - Page Pool
  - Patch and Fixture Schedule
  - Position Preset Type
  - Presets Pools
  - Remote Inputs Configuration
  - Save Show As...
  - Select DMX Address...
  - Select DMX Ports
  - Select Fixtures ID(s)
  - Select Fixture Type...
  - Select Function for Remote Inputs Configuration
  - Select Function of Executor
  - Select Language...
  - Select Session Number
  - Select Station...
  - Select Trig
  - Select Type
  - Select View
  - Select View for External Screen
  - Select Wing...
  - Session Collision
  - Settings of Executor
  - Setup
  - Shapers Preset Type
  - Software Update via USB
  - Sound Input Configuration
  - Status and Messages
  - System Clock
  - System Information
  - Time defaults
  - Timecode Configuration
  - Tools
  - Video Preset Type
  - Virtual Playbacks
  - Window Settings
  - Wings
    - Wings & Nodes Diagnosis
- Commands
  - >>> [GoFastForward]
  - <<< [GoFastBack]
  - - [Minus]
  - + [Plus]
  - Assign
  - At
  - Black
  - Blind
  - Call
  - Clone
  - Copy
  - Cue
  - Default
  - Delay
  - Delete
  - Dmx
  - DmxUniverse
  - Edit
  - Effect
  - Executor
  - Fade
  - Fix
  - Fixture
  - Flash
  - Full
  - FullHighlight
  - Go
  - GoBack
  - Goto
  - Group
  - Help
  - If
  - IfOutput
  - Invert
  - Label
  - Learn
  - Macro
  - MidiNote
  - Move
  - Off
  - On
  - OutDelay
  - OutFade
  - Page
  - Park
  - Pause
  - Preset
  - PresetType
  - Preview
  - Rate
  - Record
  - Release
  - Remove
  - Replace
  - Select
  - Selection
  - SetIP
  - SnapPercent
  - Solo
  - Stomp
  - Store
  - StoreLook
  - SyncEffects
  - Temp
  - Thru
  - Toggle
  - Top
  - Unpark
  - Update
  - View [Eye]
  - Zero
- Hints for Operating
- Error Handling
  - CrashLogCopy
  - CrashLogDelete
  - CrashLogList
  - Error Messages
- Glossary
dot2 Quick Start Guide
dot2 3D
dot2 Release Notes

Version 1.9

Title Bar

Table of contents of this topic

hide

Effect Mode Title Bar
Preview Title Bar
Patch and Fixture Schedule Title Bar

Every view has a title bar with information in which view you are and different icons.

All changes you are do in a gray title bar mode interact directly with the console.

There are different title bar icons, depending on the view.

Symbol View: Located in the fixtures view title bar.
Tap to switch to the symbol view.

Sheet View: Located in the fixtures view title bar.
Tap to switch to the sheet view.

Layout View: Located in the fixtures view title bar.
Tap to switch to the layout view.

Values Only: Located in the title bar of the fixture view.
Tap to switch between names and values.

Pin: Located in the title bar from the fixture view, presets view, cues view and DMX view.
Tap to pin your view and deactivate the dynamic view mode.

Tool: Located in the cues and executor bar window title bar.
Tap to go to the cue settings.

Trash Can: Located in the load show window title bar.
Tap to delete a show.

View: Located in the DMX view title bar.
Tap to get the full view with attributes or remove the full view.

Minimize: Located in the executor bar window title bar.
Tap to minimize the executor bar window to the executor bar.
If you see this icon, you can also close the view by swiping from the top of the screen to the bottom.

Jump Back: Located in the select fixture ID(s) view title bar.
Tap to jump backwards to the next available fixture ID.

Jump Forwards: Located in the select fixture ID(s) view title bar.
Tap to jump forwards to the next available fixture ID..

Effect Loop: Located in the preset type views title bar.
Tap to open the corresponding effect view.

Information Sign: Located in the Setup.
Tap to open the System Information Window.

Backup Icon: Located in the Load Show Window.
Tap to see the .backup files.

Esc: Located on the left side of a title bar.
Tap to leave the current view.

OK: Located on the right side of a title bar.
Tap to confirm your changes.

Frame: Located on the right side of the Wing & Nodes Diagnosis Window.
Tap to identify the selected device in the network.

Effect Mode Title Bar

If an effect is running on the selected fixtures and the preset type of the running effect is selected in the preset type bar, the preset type view changes into an effect mode and gets a purple title bar.

Effect Loop:
Located in the preset type views title bar.
Tap to open the corresponding effect view.

Normal Value:
Displays the current effect between the selected low value and high value.
Tap to overwrite the running effect with a normal value.

Low Value:
Tap to change the lowest value of the selected effect.

High Value:
Tap to change the highest value of the selected effect.

Preview Title Bar

If the preview mode is on, the fixtures view changes into a preview mode and gets an red title bar.

To leave the preview mode, press Off Prvw.

Patch and Fixture Schedule Title Bar

All title bars starting from the Patch and Fixture Schedule are displayed in blue.

A blue title bar displays, that this is a mode in which the changes do not interact directly with the console.
They need to apply by a Done .