Open topic as PDF Version 1.7

Window Settings

All windows have settings.

The settings can be accessed by tapping the MA logo in the title bar or title field.

The settings vary depending on the window. The settings are organized in different sections, visualized by different tabs.

The Display section looks like this for the Fixture Sheet:

There are some common buttons in the settings title bar. The red Delete Window button deletes the window from the screen. The closes the settings pop-up.

The Save button is used to store the current settings as a user preference. The Load button is used to load stored preferences. Read more below to learn more about how to store and load preferences.

The number of tabs changes depending on the window. Some windows have a lot of settings, some have fewer.

Changing a setting does not close the settings pop-up.

Some settings open small selection pop-ups listing the different properties for the setting.

Display / Sheet

This tab has settings regarding the way the window displays sheet information. The settings here vary a lot depending on the window. The settings that are special for a single window type are described in the topic about the window. Some of these settings are in a Display tab in the Phaser Editor some of the settings are in the Sheet tab.

The following is a list of the settings that are shared between two or more windows:

• #Columns:
  This input button is used to set how many columns a sheet should display (the settings Transpose and Adjust Columns must be switched on in all other sheets than the DMX Sheet).
• Adjust Columns:
  This On/Off button makes a sheet adjust the column width to match the window size and the number of columns.
• Appearance:
  Tapping this button opens a Select Appearance pop-up that lists all the defined appearances and the possibility to create a new appearance. Selecting one will apply that appearance to the window.
• Cue Only:
  It defines if the cue only function is On/Off when editing values in the Sequence Sheet in track sheet mode (only visible when that mode is On) and in the Content Sheet.
• Executors:
  This is an On/Off button in the Playback window and the Xkeys window. It is used to show or hide the executors in the window. If executors are hidden and labels are shown, then it looks like the executor labels in the Playback Bar on the letterbox screens.
• Feature Sort:
  This On/Off button activates feature sorting. The selected feature is moved before the other features in the Fixture Sheet, Sequence Sheet, and Content Sheet.
• Fixed Target:
  This setting defines the sequence a sheet displays if the Link Type is Fixed. Tapping this setting opens an Assignment Editor pop-up where a sequence can be selected.
• Fixture Appearance:
  This On/Off button shows or hides the appearance of the fixture in the Fixture Sheet and the Content Sheet.
• Fixture Sort:
  This On/Off button activates the sorting of fixtures. The fixtures are sorted in the selection order to the top of the Fixture Sheet , Content Sheet, and Sequence Sheet in track mode.
• Font Size:
  This selects the font size in the window. It is a swipe button that opens a list of sizes from 10 to 32. There is also a Default property. This is the same as size 18.
• Frame Readout:
  This defines the frame readout for this window. It can be used to overwrite the user profile default readout.
• Labels:
  This is an On/Off button in the Playback window and the Xkeys window. It is used to show or hide the labels in the window.
• Layer:
  It selects which layer is displayed in the window. It is a swipe button that opens a list of the layers. A special property is Auto. This property makes the window follow the selected layer in the Encoder Bar.
• Layer Toolbar:
  This On/Off button shows or hides a layer toolbar at the bottom with the different Layers. This is a property for the Fixture Sheet, Sequence Sheet, Content Sheet, and Phaser Editor.
• Link Type:
  This setting defines what sequence is shown in Sequence Sheets and Content Sheets. 
  There are three different link types. This button gives access to choosing the desired one. The options are:
  • Fixed:
    The sheet displays the information from a specific sequence. The selection is made in the Sheet Settings. Read about the Fixed Target setting above.
  • Selected:
    The sheet displays information from the selected sequence.
  • LastGo:
    This automatically shows the latest sequence to receive one of the trigger commands (<<<, >>>, Go+, Go-, Goto, Load, On, Select, Top, Temp, Flash, Toggle On, Pause). This includes if the sequence is triggered from a running timecode recording. A sequence can be excluded from LastGo by turning Off the Include Link Last Go setting in the Sequence Settings. LastGo only shows sequences triggered by the same user profile.
• Merge Cells:
  When this is On then the values of a feature are merged to only be shown once if the two or more adjacent values are the same. For instance, if all red, green, and blue values are 100, then there is only shown 100 once.
• Page:
  This is used in the Playback window , the Command Wing Bar window, and the Xkeys window. It is used to change which executor page they relate to.
• Preset:
  This defines how the preset information is displayed in the Fixture Sheet, Sequence Sheet, and Phaser Editor. There are six properties which are different combinations of these three elements:
  • ID:
    Shows the ID number of the preset.
  • Name:
    Shows the name of the preset.
  • Value:
    Shows the values stored in the preset.
• Readout:
  This selects the value readout for fixture attributes. It is a swipe button that opens a list of readout types. Here is also an Auto property. It makes the sheet follow the selected readout in the Encoder Bar.
• Setup:
  This changes the 3D, Agenda, Layout View, and the Timecode View into a mode where the different elements in the two views can be changed.
• Show Empty Rows:
  This is a sheet setting in the Phaser Editor. It shows or hides the empty attribute and layers rows in sheet view of the editor.
• Show Grand Master:
  This shows or hides the Grand Master section in the Custom/Master Section Window, the Command Wing Bar window, and the Encoder Bar Window.
• Show Master Section:
  This shows or hides the Master section in the Custom/Master Section Window and the Command Wing Bar window.
• Show Title Bar:
  This shows or hides the windows title bar in Layout View, Clock, and 3D. It is On by default. If it is Off, then the title bar can be shown temporarily by pressing both MA keys in the control area. In grandMA3 onPC the title bar can be temporarily shown by pressing Ctrl + Alt in Windows and Ctrl + Option on Mac.
• Speed:
  Setting in the Fixture Sheet and the Phaser Editor. It sets how the speed value is displayed. It has the following options: Auto (following the User Profile setting), Hertz, BPM (Beats Per Minute), Seconds.
• Step:
  It selects what step to display. Steps are used with Phasers. It is a property input button that opens a calculator pop-up. This is a property for the Fixture Sheet and Sequence Sheet.
• Time Format:
  This defines the time format for the Fixture Sheet and the Sequence Sheet windows. This can be used to select a different format than the user profile default.
• Transpose:
  This On/Off button flips the columns and rows in windows.
• View Mode:
  The view mode defines how the different data and information are displayed in the view. This setting is also a button in the title bar in the two relevant windows.
  The Phaser Editor has the following view mode properties:  Auto, 2D, 1D, and Step.
  The Timecode View has the following view mode properties: Text, Timeline, and Both.
• Wing ID:
  Defines which wing the Command Wing Bar window and the Playback window displays. Tap this setting to open a small Select WingID pop-up where the desired wing can be selected.

Pool Settings

Most pools have the same few settings. Some pools might have extra settings. The Group and Preset pools have three extra settings regarding the colored bar above each pool object. The Smart window behaves much like a pool and shares most of the pool settings.

These are the common settings for pools:

• Show Empty:
  This toggle button can hide or show empty pool objects.
• Appearance:
  The appearance is applied behind the pool objects.
• Font Size:
  There are some different font size properties from 10 to 32. There is also a default property. This is the same as size 18. This simply changes the font size on the pool objects.
• Pool Color:
  This is the color for the title button in the pool.
• Empty Color:
  This color is applied to empty pool objects.
• Reset Colors:
  This resets the colors to the colors in the default color theme.

Preset and group pools also have:

• For All:
  This color is used when the preset can be used by all of the selected fixtures.
• For Some:
  This color is used when the preset can be used by some of the selected fixtures or when there are more fixtures that can use the preset, than the current selection.
• For None:
  This color is used when the preset is not useable by any of the selected fixtures or none of the selected fixtures are in the group. 

The buttons in the title bar are the same as the ones for other window settings - read above.

Tapping one of the color settings opens an Edit Color pop-up.

Store and Load Preferences

Setting preferences can be stored and loaded for each window and pool. These preferences are stored in the user profile. This means that exporting and importing a user profile includes these preferences.

Tapping Save opens a Save Preferences pop-up:

Save a New Preference

1. Open the Settings pop-up.
2. Tap Save in the settings title bar.
3. Tap Insert new [Type] (this button changes a little for each window and the type shows what type of settings are being inserted).
4. Edit the name field and give it a name.
5. Tap Save in the preference pop-up.

Update the Preference

1. Open the Settings pop-up.
2. Tap Save in the settings title bar.
3. Tap the desired preference in the list.
4. Tap Save in the preference pop-up.

Load a Preference

1. Open the Settings pop-up.
2. Tap Load in the settings title bar.
3. Select the desired preferences.
4. Tap Load in the preference pop-up to confirm.

Delete a Preference

1. Open the Settings pop-up.
2. Tap Save in the settings title bar.
3. Select the desired preferences.
4. Tap Delete in the preference pop-up.
5. Close the pop-up by tapping the in the upper right corner.

Select different version- latest - 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0

  previous next

Open topic as PDF