- grandMA3 User Manual
- grandMA3 Quick Start Guide
- grandMA3 Quick Manual consoles
- grandMA3 Quick Manual processing units
- grandMA3 Quick Manual Nodes
- grandMA3 Quick Manual Nodes DIN-Rail
- grandMA3 Quick Manual onPC command wing XT
- grandMA3 Quick Manual onPC command wing
- grandMA3 Quick Manual onPC fader wing
- grandMA3 Quick Manual onPC rack-unit
- grandMA3 Quick Manual viz-key
- Intended Use
- Safety
- Support
- Transport
- Limitations
- Quick Start
- Maintenance
- Disposal
- Technical Data
- Hardware-related Instances
- Conformity
- grandMA3 Quick Manual I/O Nodes
- Release Notes
Version 1.9
Quick Start
- USB port type C
- Mode LEDs
1 Power On
2 USB connection with PC
3 Connection with onPC software
Start-up
- Unpack the device.
- Remove the packaging and cushioning material.
- Connect the grandMA3 viz-key via one of the USB cables with a PC or Laptop with installed grandMA3 onPC software.
- To turn off the grandMA3 viz-key, disconnect the USB connector.
- To update a grandMA3 device, download the latest software version from www.malighting.com.
For more information, read the topic Update grandMA3 viz-key in the online manual under https://help2.malighting.com/Page/grandMA3/update_viz_key/en