• grandMA3 User Manual
  • grandMA3 Quick Start Guide
  • grandMA3 Quick Manual consoles
  • grandMA3 Quick Manual processing units
  • grandMA3 Quick Manual Nodes
  • grandMA3 Quick Manual Nodes DIN-Rail
  • grandMA3 Quick Manual onPC command wing XT
  • grandMA3 Quick Manual onPC command wing
  • grandMA3 Quick Manual onPC fader wing
  • grandMA3 Quick Manual onPC rack-unit
  • grandMA3 Quick Manual viz-key
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Conformity
  • grandMA3 Quick Manual I/O Nodes
  • Release Notes
Select different version
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.7

Quick Start



  1. USB port type C
  2. Mode LEDs
    1 Power On
    2 USB connection with PC
    3 Connection with onPC software


  1. Unpack the device.
  2. Remove the packaging and cushioning material. 
  3. Connect the grandMA3 viz-key via one of the USB cables with a PC or Laptop with installed grandMA3 onPC software.
  4. To turn off the grandMA3 viz-key, disconnect the USB connector.
  5. To update a grandMA3 device, download the latest software version from www.malighting.com.
    For more information, read the topic Update grandMA3 viz-key in the online manual under https://help2.malighting.com/Page/grandMA3/update_viz_key/en

Select different version