• grandMA3 User Manual
  • grandMA3 Quick Manual consoles
  • grandMA3 Quick Manual processing
  • grandMA3 Quick Manual Nodes
  • grandMA3 Quick Manual Nodes DIN-Rail
  • grandMA3 Quick Manual onPC command wing XT
  • grandMA3 Quick Manual onPC command wing
  • grandMA3 Quick Manual onPC fader wing
  • grandMA3 Quick Manual onPC rack-unit
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Conformity
  • grandMA3 Quick Manual viz-key
  • grandMA3 Quick Manual I/O Nodes
  • Release Notes
Select different version
 
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.5

Technical Data

Important:
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
 Power cable and connector are not included in the delivery.
  • DMX: The maximum length of the cable is 350 m (in ideal conditions).
  • Use CAT-5e Ethernet cable or higher. Max. length of the cable 75 m.
grandMA3 onPC rack-unit front panel
Technical Data  
Parameters 2 048  (HTP/LTP)
Parameters Mode 2 not applicable (no Mode 2)
Operating voltage 100-240 V AC, 50/60 Hz
Net weight 4 kg / 9 lbs
Power max. 100 VA 
Dimensions 482 x 249 x 87 mm / 19 x 10 x 3.5 in

Outputs grandMA3 onPC rack-unit

grandMA3 onPC rack-unit rear panel
Number Connector
2x  DisplayPort 1.2 for external screens
2x USB 3.0 (type A) max. 900 mA
2x USB 2.0 (type A) max. 500 mA
2x RJ 45  Ethernet  10 / 100 / 1000
1x Audio Line Out (mini jack 3.5 mm)
1x Audio Line In (mini jack 3.5 mm)
2x DMX512-A OUT (5pin XLR female)
1x DMX512-A IN (5pin XLR male)
1x GPI General Purpose Interface (D-SUB DE9 female) DC Remote In
1x MIDI In (5pin DIN female)
1x MIDI Out (5pin DIN female)
1x LTC Linear Timecode  (3pin XLR female)
1x  IEC connector

Select different version