• grandMA3 User Manual
  • grandMA3 Quick Manual consoles
  • grandMA3 Quick Manual nodes
  • grandMA3 Quick Manual processing
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Conformity
  • grandMA3 Quick Manual onPC solutions
  • grandMA3 Quick Manual DIN-Rail
  • Release Notes
Select different version
 
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.0

Technical Data

Important:
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
Important:
Power cable and connector are not included in the delivery.
Hint:
The processing units M, L, XL have an equal front and back panel.
  • DMX: max. length of the cable 350 m (in ideal conditions).
  • Use CAT-5e Ethernet cable or higher. Max. length of the cable 75 m.
 

grandMA3 processing unit M, L, XL

grandMA3 processing unit – front panel
Technical Data grandMA3 processing unit M, L, XL  
Display 5'' TFT color
Operating voltage AC 100 - 240 V; 50/60 Hz
Net weight 5 kg / 12 lbs
Power max. 200 VA
Dimensions 482 x 372 x 87 mm / 19 x 15 x 4 in (width x depth x height)
Parameters  
grandMA3 processing unit M 4,096
grandMA3 processing unit L 8,192
grandMA3 processing unit XL 16,384
 

Outputs grandMA3 processing unit M, L, XL

grandMA3 processing unit – rear panel
Number Connector
1 x powerCON TRUE1*
2 x etherCON/RJ45
8 x DMX512-A OUT (5pin XLR female)
3 x USB 2.0 (type A)

*registered trademark of Neutrik AG, Liechtenstein


Select different version