- grandMA3 User Manual
- grandMA3 Quick Start Guide
- grandMA3 Quick Manual consoles
- grandMA3 Quick Manual processing units
- Intended Use
- Safety
- Support
- Transport
- Limitations
- Quick Start
- Maintenance
- Disposal
- Technical Data
- Conformity
- grandMA3 Quick Manual Nodes
- grandMA3 Quick Manual Nodes DIN-Rail
- grandMA3 Quick Manual onPC command wing XT
- grandMA3 Quick Manual onPC command wing
- grandMA3 Quick Manual onPC fader wing
- grandMA3 Quick Manual onPC rack-unit
- grandMA3 Quick Manual viz-key
- grandMA3 Quick Manual I/O Nodes
- Release Notes
Version 1.8
Maintenance
Warning:
All repair and service work has to be exclusively performed by qualified service technicians as live parts may be exposed when opening and/or removing coverings. Touching live parts may cause electric shock.
All repair and service work has to be exclusively performed by qualified service technicians as live parts may be exposed when opening and/or removing coverings. Touching live parts may cause electric shock.
Warning:
The grandMA3 processing unit has an air intake filter on the front.
Do not wash the filter.
Clean it using a vacuum cleaner only.
The grandMA3 processing unit has an air intake filter on the front.
Do not wash the filter.
Clean it using a vacuum cleaner only.
- Disconnect power supply before cleaning;
- Clean the surface with dry cloth only;
- Do not use liquid cleanser or compressed air;
- Do not use solvent;
- Check if the ventilation holes are blocked;
- Depending on the environment, we recommend to professionally clean the device every 2 to 5 years.