- grandMA3 User Manual
- grandMA3 Quick Manual consoles
- grandMA3 Quick Manual processing
- grandMA3 Quick Manual Nodes
- grandMA3 Quick Manual Nodes DIN-Rail
- grandMA3 Quick Manual onPC command wing XT
- Intended Use
- Safety
- Support
- Transport
- Limitations
- Quick Start
- Maintenance
- Disposal
- Technical Data
- Conformity
- grandMA3 Quick Manual onPC command wing
- grandMA3 Quick Manual onPC fader wing
- grandMA3 Quick Manual viz-key
- grandMA3 Quick Manual I/O Nodes
- Release Notes
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.4
Transport
Important:
Be careful when moving or lifting the grandMA3 onPC command wing XT, otherwise you may injure your back or other parts of your body.
Be careful when moving or lifting the grandMA3 onPC command wing XT, otherwise you may injure your back or other parts of your body.
- The grandMA3 onPC command wing XT must be protected from environmental factors such as physical shocks and vibration during transportation;
- Remove all cables before transport;
- The user is responsible for securely fastening the products for transport and for following the manufacturer´s safety instructions when transporting the device;
Noncompliance of the safety instructions can result in personal injury or material damage; - Do not place the grandMA3 onPC command wing XT on unstable surfaces;
- Do not place any objects on top of the grandMA3 onPC command wing XT.
Warning:
-Pay attention to temperature and humidity during transport. For more information see Limitations.
-After the transport check the device.
-If the device is damaged (dented, bent or broken), do not connect the grandMA3 onPC command wing XT to power!
-Pay attention to temperature and humidity during transport. For more information see Limitations.
-After the transport check the device.
-If the device is damaged (dented, bent or broken), do not connect the grandMA3 onPC command wing XT to power!