• grandMA3 User Manual
  • grandMA3 Quick Start Guide
  • grandMA3 Quick Manual consoles
  • grandMA3 Quick Manual processing units
  • grandMA3 Quick Manual Nodes
  • grandMA3 Quick Manual Nodes DIN-Rail
  • grandMA3 Quick Manual onPC command wing XT
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Conformity
  • grandMA3 Quick Manual onPC command wing
  • grandMA3 Quick Manual onPC fader wing
  • grandMA3 Quick Manual onPC rack-unit
  • grandMA3 Quick Manual viz-key
  • grandMA3 Quick Manual I/O Nodes
  • Release Notes
Select different version
 
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.7

Technical Data

Important:
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
Important:
Power cable and connector are not included in the delivery.
  • DMX: The maximum length of the cable is 350 m (in ideal conditions).
 
grandMA3 onPC command wing XT front panel
Technical Data  
Parameters 4 096
Parameters Mode2 not applicable (no Mode2)
Operating voltage 100-240 V AC, 50/60 Hz
Net weight 12 kg / 27 lbs
Power max. 100 VA 
Dimensions 620 x 427 x 112 mm / 24 x 17 x 5 in
 

Outputs grandMA3 onPC command wing XT

grandMA3 onPC command wing XT rear panel
Number Connector
4x  DisplayPort 1.2 for external screens
2x RJ 45
2x  USB 3.0 (type A) max. 900 mA
2x USB 2.0 (type A) max. 500 mA
1x Audio In (mini jack 3.5mm)
1x Audio Out (mini jack 3.5mm)
2 x DMX512-A OUT (5pin XLR female)
1 x DMX512-A IN (5pin XLR male)
1 x MIDI IN (5pin DIN female)
1 x MIDI OUT (5pin DIN female)
1 x LTC – Linear Time Code (3pin XLR female)
1 x GPI – General Purpose Input (D-SUB DE9 female – remote control)
1x IEC connector
1 x LED desk light (4pin XLR female)

Select different version