• grandMA3 User Manual
  • grandMA3 Quick Start Guide
  • grandMA3 Quick Manual consoles
  • grandMA3 Quick Manual processing units
  • grandMA3 Quick Manual Nodes
  • grandMA3 Quick Manual Nodes DIN-Rail
  • grandMA3 Quick Manual onPC command wing XT
  • grandMA3 Quick Manual onPC command wing
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Hardware-related Instances
    • Conformity
  • grandMA3 Quick Manual onPC fader wing
  • grandMA3 Quick Manual onPC rack-unit
  • grandMA3 Quick Manual viz-key
  • grandMA3 Quick Manual I/O Nodes
  • Release Notes
Select different version
 
Version 1.9

Technical Data

Important:
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
Important:
Power cable and connector are not included in the delivery.
  • DMX: The maximum length of the cable is 350 m (in ideal conditions).
 
grandMA3 onPC command wing front panel
Technical Data  
Parameters 4 096
Parameters Mode2 not applicable (no Mode 2)
Operating voltage 100-240 V AC, 50/60 Hz
Net weight 10 kg / 23 lbs
Power max. 50 VA 
Dimensions 620 x 427 x 102 mm / 24 x 17 x 4 in
 

Outputs grandMA3 onPC command wing

grandMA3 onPC command wing rear panel
Number Connector
1 x IEC connector
2 x DMX512-A OUT (5pin XLR female)
1 x DMX512-A IN (5pin XLR male)
1 x MIDI IN (5pin DIN female)
1 x MIDI OUT (5pin DIN female)
1 x LTC – Linear Time Code (3pin XLR female)
1 x GPI – General Purpose Input (D-SUB DE9 female – DC remote control)
1 x USB 2.0 (type B)
1 x LED desk light (4pin XLR female)

Select different version