• grandMA3 User Manual
  • grandMA3 Quick Manual consoles
  • grandMA3 Quick Manual nodes
  • grandMA3 Quick Manual processing
  • grandMA3 Quick Manual onPC solutions
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Conformity
  • grandMA3 Quick Manual DIN-Rail
  • Release Notes
Select different version
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.1

Technical Data

Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
Power cable and connector are not included in the delivery.
  • DMX: The maximum length of the cable is 350 m (in ideal conditions).

grandMA3 onPC command wing

grandMA3 onPC command wing front panel
Technical Data  
Parameters 2,048
Operating voltage AC 100 - 240 V; 50/60 Hz
Net weight 10 kg / 23 lbs
Power max. 50 VA 
Dimensions 620 x 427 x 102 mm / 24 x 17 x 4 in

Outputs grandMA3 onPC command wing

grandMA3 onPC command wing rear panel
Number Connector
1 x IEC connector
2 x DMX512-A OUT (5pin XLR female)
1 x DMX512-A IN (5pin XLR male)
1 x MIDI IN (5pin DIN female)
1 x MIDI OUT (5pin DIN female)
1 x LTC – Linear Time Code IN (3pin XLR female)
1 x GPI – General Purpose Input (D-SUB DE9 female – remote control)
1 x USB 2.0 (type B)
1 x LED desk light (4pin XLR female)

Select different version