- grandMA3 User Manual
- grandMA3 Quick Start Guide
- grandMA3 Quick Manual consoles
- grandMA3 Quick Manual processing units
- grandMA3 Quick Manual Nodes
- grandMA3 Quick Manual Nodes DIN-Rail
- grandMA3 Quick Manual onPC command wing XT
- grandMA3 Quick Manual onPC command wing
- Intended Use
- Safety
- Support
- Transport
- Limitations
- Quick Start
- Maintenance
- Disposal
- Technical Data
- Hardware-related Instances
- Conformity
- grandMA3 Quick Manual onPC fader wing
- grandMA3 Quick Manual onPC rack-unit
- grandMA3 Quick Manual viz-key
- grandMA3 Quick Manual I/O Nodes
- Release Notes
Version 1.9
Maintenance
Warning:
All repair and service work has to be exclusively performed by qualified service technicians as live parts may be exposed when opening and / or removing coverings. Touching live parts may cause electric shock.
All repair and service work has to be exclusively performed by qualified service technicians as live parts may be exposed when opening and / or removing coverings. Touching live parts may cause electric shock.
Important:
The intervals between maintenance may differ depending on the frequency of transport and the operational environment.
The intervals between maintenance may differ depending on the frequency of transport and the operational environment.
- Disconnect power supply before cleaning;
- Clean the surface using dry cloth only;
- Clean the wrist rest using a damp cloth only;
- Do not use liquid cleanser or compressed air;
- Do not use solvent;
- Check if the ventilation holes are blocked;
- Depending on the environment, we recommend to professionally clean the device once a year.