- grandMA3 User Manual
- grandMA3 Quick Start Guide
- grandMA3 Quick Manual consoles
- grandMA3 Quick Manual processing units
- grandMA3 Quick Manual Nodes
- grandMA3 Quick Manual Nodes DIN-Rail
- grandMA3 Quick Manual onPC command wing XT
- grandMA3 Quick Manual onPC command wing
- grandMA3 Quick Manual onPC fader wing
- grandMA3 Quick Manual onPC rack-unit
- grandMA3 Quick Manual viz-key
- grandMA3 Quick Manual I/O Nodes
- Intended Use
- Safety
- Support
- Transport
- Limitations
- Installation
- Quick Start
- Maintenance
- Disposal
- Technical Data
- Hardware-related Instances
- Conformity
- Release Notes
Version 1.9
Limitations
Temperature
Operation:
I/O Nodes: 0 °C up to 40 °C / 32 °F up to 104 °F
I/O Nodes DIN-Rail: -10 °C up to +50 °C / 14 °F up to 122 °F
Caution:
Higher temperatures can stress the cooling system of the device and destroy hardware components.
Higher temperatures can stress the cooling system of the device and destroy hardware components.
Storage / Transport: -10 °C up to +50 °C / 14 °F up to 122 °F
Humidity
Operation: 20 % up to 90 % relative humidity (no condensation)
Storage / Transport: 10 % up to 90 % relative humidity (no condensation)
Environment
- Follow all safety instructions;
- Only use the device within its operating limits;
- Only use the device indoors;
- Air must be free of dust and any hazardous or explosive substances;
- Avoid jolting;
- This device is not protected against splash water. Do not use it near water;
- Do not use the device in rain or moisture;
- Do not place the device where it can come in contact with corrosive gases or saline air as this can cause maloperation.