• grandMA3 User Manual
  • grandMA3 Quick Manual consoles
  • grandMA3 Quick Manual processing
  • grandMA3 Quick Manual Nodes
  • grandMA3 Quick Manual Nodes DIN-Rail
  • grandMA3 Quick Manual onPC command wing XT
  • grandMA3 Quick Manual onPC command wing
  • grandMA3 Quick Manual onPC fader wing
  • grandMA3 Quick Manual viz-key
  • grandMA3 Quick Manual I/O Nodes
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Installation
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Conformity
  • Release Notes
Select different version
 
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.4

Limitations

Temperature

Operation:

I/O Nodes: 0 °C up to 40 °C / 32 °F up to 104 °F

I/O Nodes DIN-Rail: -10 °C up to +50 °C / 14 °F up to 122 °F

Caution:
Higher temperatures can stress the cooling system of the device and destroy hardware components. 

Storage / Transport: -10 °C up to +50 °C / 14 °F up to 122 °F

Humidity

Operation: 20 % up to 90 % relative humidity (no condensation)

Storage / Transport: 10 % up to 90 % relative humidity (no condensation)

Environment​

  • Follow all safety instructions;
  • Only use the device within its operating limits;
  • Only use the device indoors; 
  • Air must be free of dust and any hazardous or explosive substances; 
  • Avoid jolting;  
  • This device is not protected against splash water. Do not use it near water; 
  • Do not use the device in rain or moisture;
  • Do not place the device where it can come in contact with corrosive gases or saline air as this can cause maloperation. 

Select different version