• grandMA3 User Manual
  • grandMA3 Quick Manual consoles
  • grandMA3 Quick Manual processing
  • grandMA3 Quick Manual Nodes
  • grandMA3 Quick Manual Nodes DIN-Rail
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Installation
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Conformity
  • grandMA3 Quick Manual onPC command wing XT
  • grandMA3 Quick Manual onPC command wing
  • grandMA3 Quick Manual onPC fader wing
  • grandMA3 Quick Manual viz-key
  • grandMA3 Quick Manual I/O Nodes
  • Release Notes
Select different version
 
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.4

Technical Data

Hint:
grandMA3 xPort Node DIN-Rails are powered by a direct power connection using a terminal block connector, a PoE switch, or a PoE injector.
Important:
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
Important:
Use the USB port for updates only. Do not connect any peripheral devices (for example, mouse, keyboard).
Each 3pin DMX512-A Out can be individually configured as DMX In. 
  • DMX: The maximum length of the cable is 350 m (in ideal conditions).
  • Use CAT-5e Ethernet cable or higher. Max. length of the cable 75 m.
 
grandMA3 8Port Node DIN-Rail front panel

grandMA3 8Port Node DIN-Rail 

Technical Data  
Parameters None
Display 3.9 '' TFT color 

Operating voltage (electrical grid)

AC 100 - 240 V; 50/60 Hz
Operating voltage (PoE) IEEE 802.3af
48 V DC/max. 12 W 
Net weight 1 kg / 3 lbs
Power max. 15 VA 
Dimensions 150 x 50 x 90 mm / 6 x 2 x 4 in (width x depth x height)
 

Outputs grandMA3 8Port Node DIN-Rail 

grandMA3 8Port Node DIN-Rail rear panel
Number Connector
8 x 3pin PCB connector (DMX512-A Out)
1 x RJ45
1 x USB 2.0 (type A)
 

grandMA3 4Port Node DIN-Rail

Technical Data  
Parameters None
Display 3.9 '' TFT color 

Operating voltage (electrical grid)

AC 100 - 240 V; 50/60 Hz
Operating voltage (PoE) IEEE 802.3af
48 V DC/max. 12 W 
Net weight 1 kg / 3 lbs
Power max. 15 VA 
Dimensions 150 x 50 x 90 mm / 6 x 2 x 4 in (width x depth x height)

Outputs grandMA3 4Port Node DIN-Rail

grandMA3 4Port Node DIN-Rail rear panel
Number Connector
4 x 3pin PCB connector (DMX512-A Out)
1 x RJ45
1 x USB 2.0 (type A)
 

grandMA3 2Port Node DIN-Rail

Technical Data  
Parameters None 
Display 3.9 '' TFT color 

Operating voltage (electrical grid)

AC 100 - 240 V; 50/60 Hz
Operating voltage (PoE) IEEE 802.3af
48 V DC/max. 12 W 
Net weight 1 kg / 3 lbs
Power max. 15 VA 
Dimensions 150 x 50 x 90 mm / 6 x 2 x 4 in (width x depth x height)

Outputs grandMA3 2Port Node DIN-Rail

grandMA3 2Port Node DIN-Rail rear panel
Number Connector
2 x 3pin PCB connector (DMX512-A Out)
1 x RJ45
1 x USB 2.0 (type A)

grandMA3 onPC 8Port Node DIN-Rail 4k

Technical Data  
Parameters 4 096 (HTP/LTP)
Parameters Mode2 2 048 (HTP/LTP)
Display 3.9 '' TFT color 

Operating voltage (electrical grid)

AC 100 - 240 V; 50/60 Hz
Operating voltage (PoE) IEEE 802.3af
48 V DC/max. 12 W 
Net weight 1 kg / 3 lbs
Power max. 15 VA 
Dimensions 150 x 50 x 90 mm / 6 x 2 x 4 in (width x depth x height)

grandMA3 onPC 4Port Node DIN-Rail 4k

Technical Data  
Parameters 4 096 (HTP/LTP)
Parameters Mode2 2 048 (HTP/LTP)
Display 3.9 '' TFT color 

Operating voltage (electrical grid)

AC 100 - 240 V; 50/60 Hz
Operating voltage (PoE) IEEE 802.3af
48 V DC/max. 12 W 
Net weight 1 kg / 3 lbs
Power max. 15 VA 
Dimensions 150 x 50 x 90 mm / 6 x 2 x 4 in (width x depth x height)

grandMA3 onPC 2Port Node DIN-Rail 2k

Technical Data  
Parameters 2 048 (HTP/LTP)
Parameters Mode2 1 024 (HTP/LTP)
Display 3.9 '' TFT color 

Operating voltage (electrical grid)

AC 100 - 240 V; 50/60 Hz
Operating voltage (PoE) IEEE 802.3af
48 V DC/max. 12 W 
Net weight 1 kg / 3 lbs
Power max. 15 VA 
Dimensions 150 x 50 x 90 mm / 6 x 2 x 4 in (width x depth x height) 

Select different version