Sequence Settings

Each sequence has a lot of different settings. The settings can be accessed from the top bar of each sequence sheet or from the executor assign menu. Each of these two locations has a button called Settings. Tap this button to open the settings.

The settings are divided into different sections. Label, Start, Playback, Speed, Protect, and MIB. Read about the different settings in each section below.

Each user profile has default sequence settings. These settings are used when a new sequence is created. The default can be loaded and stored from this pop-up.

The title bar has two buttons that are relevant. The left one is Load from default. Tapping this loads the stored sequence defaults. Next to this is Save as default. Tapping this stored the current settings as the new default.

Label

This group is about the name and look of the sequence.

Name

Edit this input field to change the name of the sequence.

Scribble

This scribble field can be used to select or create a scribble for the sequence. This scribble is visible in the sequence pool and on the executor label.

Appearance

This appearance field can be used to select or create an appearance for the sequence. This appearance is visible in the sequence pool and on the executor label.

Prefer Cue Appearance

When this option is enabled, and the current cue has an appearance, the cue appearance will be displayed on the executor or in the layout, instead of the sequence appearance.

Executor Display Mode

The executor display mode defines how the sequence will be displayed on an executor:

• Data only:
  Only the cues with their appearances will be displayed. The cue appearance is only displayed in the line of the cue, and not in the background.
• Appearance only:
  Only the sequence or cue appearance will be displayed. No cue names, fade bar, etc. will be displayed. This can be handy for sequences with only one cue, or for sequences with only color cues or gobo cues.
• Both:
  Each cue line displays its cue appearance, and the sequence appearance or the appearance of the current cue will be displayed in the background of the executor.

Start

The settings in this section are about starting and stopping the sequence.

Auto Start

The Auto Start feature switches the executor 'On' when the master is moved from zero.

Auto Stop

The Auto Stop feature switches the executor 'Off' when the master is moved down to zero.

Master Go Mode

The Master Go function is active if auto stop is turned Off. Tapping this button opens the Select Master Go Mode pop-up.

There are four options here. They all take effect when the master fader is moved from zero and up. The options are:

• None:
  The cue is still running.
• Go:
  It executes a Go.
• On:
  The current cue is reloaded (fading in again).
• Top:
  The first cue is activated.

Auto Fix

The Auto Fix feature can be activated for each executor. It will automatically Fix active executors and keep them visible even when pages are changed. The executor is automatically unfixed when it is switched off.

Auto Stomp

If auto stomp is On, then an absolute value from a cue will stomp a phaser running from a different playback.

Playback

The playback settings are about running the cues. Running or playing back cues is described in the Play Back Cues topic.

Tracking

This turns On or Off value tracking in the sequence. Read more in the What is Tracking topic.

Wrap Around

Wrap around allows the sequence to return to the top/first cue if a Go (forward) command is performed after the last cue in the sequence is reached.

Release First Cue

This setting defines if the first cue releases tracking values. These tracking values can come from the last cue if Wrap Around is active. If Release First Cue is On then it adds a <Yes> to the Release column in the first cue of the sequence. Learn more about the different columns in the Look at Cue and Sequences topic. The first cue can manually be set to release by editing the field in the sequence.

Restart Mode

There are three different restart modes:

• First Cue:
  This always restarts the sequence with the first cue.
• Current Cue:
  This restarts the sequence with the cue where it was when the sequence was turned Off.
• Next Cue:
  This restarts the sequence with the next cue based on where it was when the executor was turned Off.

Cmd Enable

This option disables the execution of the commands in the CMD columns in a sequence. The stored commands are not deleted or removed, they are just disabled.

XFade Reload

When this option is enabled, the Xfader needs to be pulled back to 0 after completing a crossfade in order to do the next crossfade.

Output Filter

The output filter can have a Filter or World assigned. Tapping the button opens the Assignment Editor pop-up:

The editor has three tabs. Empty can be used to select no filtering. Filter and World are lists of each type. Each lists the possible choices of their type. Tap the desired filter or world to apply it.

The fixtures and attributes in the world or filter are allowed to pass the output filter and can be output from the sequence. The same sequence can be played back from several executors and each executor share the output filter settings. If different output filters are needed, then the sequence should be linked or shared with another sequence. The other sequence can have different output filter settings. Read about linked sequences in the Cues and Sequences topic.

If the sequence has an output filter applied, then there is a small output filter icon () in the sequence pool button.

Priority

This is the priority of the sequence. The priorities are described in the Play Back Cue topic.

Soft LTP

The Soft LTP function is described in the Play Back Cue topic.

Playback Master

Here it is possible to select a Playback Master. It functions as a sub-master that can be shared by multiple sequences.

XFade Mode

This is used to set how the two CrossfadeA/XFadeA and CrossfadeB/XFadeB faders work. There are two crossfade modes:

• Split:
  The dual crossfaders work as masters for the current/next cue.
• AB:
  The dual crossfaders work as crossfaders for increasing/decreasing values.

Speed

Speed and rate can be used to adjust the stored times without having to reprogram the show. For instance, a cue can have a fade time of 5 seconds. A rate master can then adjust the fade time live while playing it back. All sequences have their own individual rate and speed, but they can be linked to a global master. This master can then adjust the timing for multiple sequences at the same time. Read more details in the Speed Masters topic.

Rate Master

The sequence has a rate master. It can be linked to a shared global speed master or it can have an individual rate master. Tapping this button will open the Select Rate Master pop-up.

In the pop-up it is possible to select the None option for having an individual rate master for the sequence or select one of the global speed masters.

Rate Scale

Enabling this binds the rate to defined steps instead of a variable value. Tapping this button opens the Select Rate Scale pop-up.

Choosing one of the steps in the pop-up selects the multiplier or divider. This multiplies or divides the rate by the selected factor.

Speed Master

The sequence has a speed master. It can be linked to a shared global speed master or it can have an individual speed master. Tapping this button will open the Select Speed Master pop-up.

In this pop-up, it is possible to select the None option for having an individual speed master for the sequence or select one of the global speed masters.

Speed Scale

If a sequence is assigned to a global speed master (read above) then it can be useful to adjust a speed scale. Tapping this button will open the Select Speed Scale pop-up.

In the pop-up, it is possible to select one of the multipliers or dividers. This multiplies or divides the speed by the selected factor.

Speed from Rate

This links the speed to follow the rate.

Protect

This group of settings is used to protect the sequence from different actions.

Input Filter

The playback filter is described in a little bit more detail in the Cues and Sequences topic. Tapping this button opens the Assignment Editor pop-up: See above about the output filter

The fixtures and attributes in the world or filter are allowed to pass the filter and can be stored in the sequence.

Swop Protect

Activating this option protects this sequence from the Swop function.

Include Link Last Go

This setting is On as default. When it is set to Off, playing back a sequence will not trigger the LinkLastGo functionality in the sequence sheet.

Use Executor Time

This makes the executor playback cues using the stored timing. If this is turned on then it is affected by the Exec Time master fader, who overwrites the timing.

Off when Overridden

The Off when Overridden function allows that a sequence is automatically turned Off if another sequence has taken control with all the attributes in the sequence = this executor does not control any attributes.

Lock Sequence

The sequence is locked against changes when this is On. It can still be played back.

MIB

This group is about MIB settings for the sequence. Read more about MIB in the Move In Black topic.

MIB

Enable, disable, or force MIB for the sequence. The options are:

• Enabled:
  MIB will be performed according to the cue and cue part MIB settings.
• Never:
  MIB will never be performed for this sequence. All cue and cue part-specific MIB settings will be ignored.
• Force Early:
  Forces the early MIB for all cues that can perform MIB as soon as the dimmer is closed. Further MIB settings specified per cue or cue part will be ignored.
• Force UponGo:
  MIB is forced to be executed with the next cue transition after the dimmer is closed. For all cues that can perform MIB. Further MIB settings specified per cue or cue part will be ignored.
• Force Late:
  Forces the MIB latest in the cue before the dimmer opens again. For all cues that can perform MIB. Further MIB settings specified per cue or cue part will be ignored.

MIB Mode

This setting defines which MIB mode will be executed when doing a MIB. The MIB Mode per cue or cue part needs to be set to Default. The options are:

• None
• Early
• UponGo
• Late

Learn about the mode types in the MIB topic (link above).