- grandMA3 User Manual
- grandMA3 Quick Manual consoles
- Intended Use
- Safety
- Support
- Transport
- Limitations
- Quick Start
- Maintenance
- Disposal
- Technical Data
- Pixel Faults
- Conformity
- grandMA3 Quick Manual processing
- grandMA3 Quick Manual Nodes
- grandMA3 Quick Manual DIN-Rail
- grandMA3 Quick Manual onPC command wing XT
- grandMA3 Quick Manual onPC command wing
- grandMA3 Quick Manual onPC fader wing
- Release Notes
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.3
Limitations
Temperature
Operation:
0 °C up to 40 °C / 32 °F up to 104 °F
Caution:
-Temperatures that exceed or fall below the range of those stated in this Quick Manual can cause maloperation of displays and other components.
-Higher temperatures can stress the cooling system of the device and destroy hardware components.
-Temperatures that exceed or fall below the range of those stated in this Quick Manual can cause maloperation of displays and other components.
-Higher temperatures can stress the cooling system of the device and destroy hardware components.
Storage / Transport:
-10 °C up to +50 °C / 14 °F up to 122 °F
Humidity
Operation:
20 % up to 90 % relative humidity (no condensation)
Storage / Transport:
10 % up to 90 % relative humidity (no condensation)
Environment
- Follow all safety instructions;
- Only use the device within its operating limits;
- Only use the device indoors;
- Air must be free of dust and any hazardous or explosive substances;
- Avoid jolting;
- This device is not protected against splash water. Do not use it near water;
- Do not use the device in rain or moisture;
- Do not place the device where it can come in contact with corrosive gases or saline air as this can cause maloperation.