• grandMA3 User Manual
  • grandMA3 Quick Manual consoles
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Display Conditions
    • Conformity
  • grandMA3 Quick Manual processing
  • grandMA3 Quick Manual nodes
  • grandMA3 Quick Manual DIN-Rail
  • grandMA3 Quick Manual onPC solutions
  • Release Notes
Select different version
 
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.1

Quick Start

 grandMA3 connectors

grandMA3 full-size rear panel
Hint:
To display the rear panel connectors on the letterbox screens, type:
Menu "Connectorview"

1. Desk light

2. powerCON TRUE1

3. Power switch

4.-10. DMX

11. DisplayPort 4

12. MIDI In

13. MIDI Out

14. DisplayPort 5

15. LTC / SMPTE In

16. USB 3.0

17. Audio Remote In

18. DC Remote In

19. S/PDIF In

20. Ethernet 1

21. Ethernet 2

22. Ethernet 3

23. S/PDIF Out

24. 3x USB 2.0

Turn on the console

  1. Unpack the device.
  2. Remove the packaging, cushioning material, and the dust cover. 
  3. Place the device indoors on a stable surface.
  4. Connect external monitors to the console using a native DisplayPort connector. 
  5.  
    Start the grandMA3 console:
    -Insert powerCON TRUE1 into the corresponding jack. 
    -Connect the main power plug.
    -Turn on the power switch:
    -Set it to position I
    -The power switch lights up in red.
    -Press the power key on the front panel. 
    -The device starts booting.
    -The Mode Selection dialog appears.
Select mode

-Tap to select a mode.

 

Turn off the console

To turn off the grandMA3 console:
-Press the power key on the front panel.
-A warning pop-up appears.

Shut down the grandMA3 console

-Tap OK.
-The grandMA3 console powers down.
-Set the power switch to position O

 


Select different version