- grandMA3 User Manual
- grandMA3 Quick Start Guide
- grandMA3 Quick Manual consoles
- grandMA3 Quick Manual processing units
- grandMA3 Quick Manual Nodes
- grandMA3 Quick Manual Nodes DIN-Rail
- grandMA3 Quick Manual onPC command wing XT
- grandMA3 Quick Manual onPC command wing
- grandMA3 Quick Manual onPC fader wing
- grandMA3 Quick Manual onPC rack-unit
- grandMA3 Quick Manual viz-key
- grandMA3 Quick Manual I/O Nodes
- Intended Use
- Safety
- Support
- Transport
- Limitations
- Installation
- Quick Start
- Maintenance
- Disposal
- Technical Data
- Hardware-related Instances
- Conformity
- Release Notes
Version 1.9
Technical Data
Hint:
grandMA3 I/O Nodes PoE can also be powered by a direct power connection using a PoE switch, or a PoE injector.
grandMA3 I/O Nodes PoE can also be powered by a direct power connection using a PoE switch, or a PoE injector.
Important:
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
Important:
Power cable and connector are not included in the delivery.
Power cable and connector are not included in the delivery.
Important:
Use the USB port for updates only. Do not connect any peripheral devices (for example, mouse, keyboard).
Use the USB port for updates only. Do not connect any peripheral devices (for example, mouse, keyboard).
- Use CAT-5e Ethernet cable or higher. Max. length of the cable 75 m.
grandMA3 I/O Node
Technical Data | |
---|---|
Parameters | None |
Display | 3.9 '' TFT color |
Operating voltage (electrical grid) | 100-240 V AC, 50/60 Hz |
Operating voltage (PoE) | IEEE 802.3af; 48 V DC/max. 12 W |
Net weight | 2 kg / 5 lbs |
Power | max. 15 VA |
Dimensions | 207 x 184 x 43 mm / 9 x 8 x 2 in (width x depth x height) |
Outputs grandMA3 I/O Node
Number | Connector |
---|---|
1 x | powerCON TRUE1* |
1 x | MIDI In |
1 x | MIDI Out |
1 x | LTC |
1 x | DC Remote IN |
1 x | etherCON/RJ45 L (link) G (gigabit) |
1 x | USB 2.0 (type A)** |
* registered trademark of Neutrik AG, Liechtenstein
** Do not connect any peripheral device (mouse, keyboard, or similar).
grandMA3 I/O Node DIN-Rail
Technical Data | |
---|---|
Parameters | None |
Display | 3.9" TFT Color |
Operating voltage | 100-240 V AC, 50/60 Hz |
Operating voltage (PoE) |
IEEE 802.3af 48 V DC / max. 12 W |
Net weight | 1 kg / 3 lbs |
Power | max. 15VA |
Dimensions | 150 x 50 x 90 mm / 6 x 2 x 4 in (width x depth x height) |
Outputs grandMA3 I/O Node DIN-Rail
Number | Connector |
---|---|
1 x | MIDI In |
1 x | MIDI Out |
1 x | LTC |
1 x | DC Remote |
1 x | etherCON/RJ45 L (link) G (gigabit) |
1 x | USB 2.0 (type A)** |
** Do not connect any peripheral device (mouse, keyboard, or similar).