• grandMA3 User Manual
  • grandMA3 Quick Manual consoles
  • grandMA3 Quick Manual processing
  • grandMA3 Quick Manual Nodes
  • grandMA3 Quick Manual Nodes DIN-Rail
  • grandMA3 Quick Manual onPC command wing XT
  • grandMA3 Quick Manual onPC command wing
  • grandMA3 Quick Manual onPC fader wing
  • grandMA3 Quick Manual onPC rack-unit
  • grandMA3 Quick Manual viz-key
  • grandMA3 Quick Manual I/O Nodes
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Installation
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Conformity
  • Release Notes
Select different version
 
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.5

Technical Data

Hint:
grandMA3 I/O Nodes PoE can also be powered by a direct power connection using a PoE switch, or a PoE injector.
Important:
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
Power cable and connector are not included in the delivery. 
Important:
Use the USB port for updates only. Do not connect any peripheral devices (for example, mouse, keyboard).
  • Use CAT-5e Ethernet cable or higher. Max. length of the cable 75 m.

grandMA3  I/O Node

Technical Data  
Parameters None
Display 3.9 '' TFT color 
Operating voltage (electrical grid) 100-240 V AC, 50/60 Hz
Operating voltage (PoE) IEEE 802.3af; 48 V DC/max. 12 W
Net weight 2 kg / 5 lbs
Power max. 15 VA
Dimensions 207 x 184 x 43 mm / 9 x 8 x 2 in (width x depth x height)

 

Outputs grandMA3 I/O Node 

Number Connector
1 x powerCON TRUE1*
1 x MIDI In
1 x MIDI Out
1 x LTC
1 x DC Remote IN
1 x etherCON/RJ45       L (link)   G  (gigabit)
1 x USB 2.0 (type A)**

  * registered trademark of Neutrik AG, Liechtenstein
  ** Do not connect any peripheral device (mouse, keyboard, or similar).

 

grandMA3 I/O Node DIN-Rail

Technical Data  
Parameters None
Display 3.9"   TFT  Color
Operating voltage 100-240 V AC, 50/60 Hz
Operating voltage (PoE)

IEEE 802.3af    48 V DC / max. 12 W
Net weight 1 kg / 3 lbs
Power max. 15VA 
Dimensions 150 x 50 x 90 mm / 6 x 2 x 4 in (width x depth x height)

 

Outputs grandMA3 I/O Node DIN-Rail

Number Connector
1 x MIDI In
1 x MIDI Out
1 x LTC
1 x DC Remote
1 x etherCON/RJ45       L (link)   G  (gigabit)
1 x USB 2.0 (type A)**

  ** Do not connect any peripheral device (mouse, keyboard, or similar). 


Select different version