• grandMA3 User Manual
  • grandMA3 Quick Start Guide
  • grandMA3 Quick Manual consoles
  • grandMA3 Quick Manual processing units
  • grandMA3 Quick Manual Nodes
  • grandMA3 Quick Manual Nodes DIN-Rail
  • grandMA3 Quick Manual onPC command wing XT
  • grandMA3 Quick Manual onPC command wing
  • grandMA3 Quick Manual onPC fader wing
    • Intended Use
    • Safety
    • Support
    • Transport
    • Limitations
    • Quick Start
    • Maintenance
    • Disposal
    • Technical Data
    • Declaration of Conformity
  • grandMA3 Quick Manual onPC rack-unit
  • grandMA3 Quick Manual viz-key
  • grandMA3 Quick Manual I/O Nodes
  • Release Notes
Select different version
 
Version 1.8

Technical Data

Important:
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
 Power cable and connector are not included in the delivery.
  •  DMX: The maximum length of the cable is 350 m (in ideal conditions).

 

grandMA3 onPC fader wing front panel
 

 

Technical Data  
Parameters 4 096 (HTP/LTP)
Operating voltage 100-240 V AC, 50/60 Hz 
Net weight 5 kg / 11 lbs
Power max. 50 VA 
Dimensions 240 x 427 x 102 mm / 10 x 17 x 4 in

 

Outputs grandMA3 onPC fader wing

grandMA3 onPC fader wing rear panel
Number Connector
1 x USB 2.0 (type B)
2 x DMX512-A OUT (5pin XLR female)
1 x IEC connector
1 x LED desk light (4pin XLR female)

 


Select different version