• grandMA2
  • grandMA3 Mode2
    • Mode2
    • Screen Layout
      • Screen 1
      • Screen 2
      • Screen 3
      • External screens
      • Command screens
      • Letterbox screens
    • Update grandMA3 Consoles
    • Update grandMA3 xPort Nodes
    • grandMA3 Settings
    • Version Specification
  • grandMA2 Quick Start Guide
  • grandMA2 Quick Manual onPC solutions
  • MA 3D
  • MA VPU
  • Release Notes
Select different version
 
There's no German translation of this page yet, so the English version is shown.
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 3.7

Screen 1

grandMA3 full-size

In a grandMA3 full-size screen 1 corresponds to screen 2 on a grandMA2 full-size console.

Screen layout of screen 1
  1. Command line feedback – displays the history of commands at a glance.
  2. ToolsSetupBackup – allow fast access on the grandMA3 console.  
  • The upper section – user-defined area and the command line – of screen 2 and the view buttons stay the same.
  • Tools, Setup and Backup are also displayed in the Setup Menu. To access the Setup Menu on the grandMA3 console, press Menu.  

For more information on the upper screen see Screen Layout – Screen 2.


 

grandMA3 compact and compact XT

Important:
The grandMA3 compact only has screen 1 in the monitor wing.
Screen 1 in grandMA3 compact and compact TX 
  1. Macro Buttons – allow fast access on the grandMA3 compact and compact XT. 
  2. Fader and Button Pages – display current  fader and button pages. 
  • The upper section of the screen stays the same.

For more information on the upper screen see Screen Layout – Screen 2

 

Various Bars in grandMA3 compact and compact XT

  1. In grandMA3 compact XT, it is possible to toggle between the encoder bar and x-key labels:
  • To display the x-key labels, press U1.
    The key lits up.
  • To toggle back to the encoder bar, press U1 again. 
Toggle x-key labels in grandMA3 compact XT 
Important:
As default the x-keys X5, X6, X15 and X16 are grayed out as they do not exist on a grandMA3 console. For more information see grandMA3 Settings
  1. In grandMA3 compact it is also possible to toggle between the encoder bar (or the x-key labels) and the mini executor bar
  • To display the mini executor bar, press U2.
    The key lits up. 
  • To toggle back to the encoder bar (or x-key labels), press U2
Toggle mini executor bar in grandMA3 compact

 


Select different version