• grandMA2
  • grandMA3 Mode2
    • Mode2
    • Screen Layout
      • Screen 1
      • Screen 2
      • Screen 3
      • External screens
      • Command screens
      • Letterbox screens
    • Update grandMA3 Consoles
    • Update grandMA3 xPort Nodes
    • grandMA3 Settings
    • Version Specification
  • grandMA2 Quick Start Guide
  • grandMA2 Quick Manual onPC solutions
  • MA 3D
  • MA VPU
  • Release Notes
Select different version
 
There's no German translation of this page yet, so the English version is shown.
Version 3.7

What is Mode2?

The grandMA3 Mode2 is used to run the grandMA2 software on a grandMA3 console.

As the grandMA3 console has a different physical layout compared to the grandMA2, the display of windows and bars, and pool objects also differs in Mode2.

The grandMA3 full-size and the light both feature Mode2, which runs the native grandMA2 software version 3.4 and later.

Restriction:
Some of the sections and buttons of the grandMA3 console are not assigned in Mode2. 
These are:
- Executor knobs in the executor section; 
- Upper and lower encoders along with the upper and lower encoder buttons 1 to 3 in the custom section; 
-Master knobs 1 to 2 and master buttons 1 to 2 in the master section;
-In grandMA3 CRV versions always connect the screens subsequently starting with DisplayPort 1;
-In grandMA3 CRV versions use at least one Full HD display and a touch display or a mouse.
-All displays have to have a Full HD resolution of 1,920 x 1,080.

Select different version