Open topic as PDF Version 3.3

Local settings

The local settings are located in the Setup I Console I Local Settings.

Default Language

It is not possible to change this setting, as the console, at the moment, only supports English language. 

Network DMX if alone

When this is "On", the console will output DMX over network when only one desk (as master) is in the session.

Example

In the following example, 3 consoles are in a session, connected with one switch to manage MANet on the first ethernet port, and another one to manage Art-Net on ethernet port 2. All the consoles have Network DMX if alone enabled.

If the switch that distribute MANet fails, all 3 consoles will be "Alone" in the network, become Master and will send out Art-Net. This will make a conflict in the fixtures because they will receive Art-Net from 3 different sources. To avoid this conflict, make sure that only one of the consoles have Network DMX if alone enabled. This will make sure that when the consoles are "Alone" in the network, only the console with Network DMX if alone will send out Art-Net.

Show release notes on start

Turn Show Release Notes on Start "On" or "Off", to see the release notes on startup.

Flashing error LED on wrong fader position

Turn Flashing error LED on wrong fader position "On" or "Off" to let a red LED flash, if the fader is in a wrong position.

Exec CLI

Turn Exec CLI ​(Command Line Interaction) "On" or "Off" to let the Command Line interact with the executors.

In the following  example Exce CLI is "Off".

If Select is pressed, followed by an Executor button, this will NOT select the executor, but perform the action assigned to the button.

Default Go, Goback, Pause CLI

Turn Default Go, Goback, Pause CLI "On" or "Off" to let the Command Line interact with the big Default Go, Goback and Pause keys.

In the following  example Default Go, Goback, Pause CLI is "Off".

If a macro is edited and Default Go is pressed, the system will NOT enter DefaultGo in the macro-line, but execute the next cue in the selected executor.

Intensity Btn Background

The background light of the keys on the console can be set. Follow these steps:

1. Tap the green square in the Intensity Btn Background area.
2. Tap the intensity as a number between 0 and 79. 0 is no light and 79 is full.  

Intensity Btn Highlight

The highlight light of the keys on the console can be set. Follow these steps:

1. Tap the green square in the Intensity Btn Highlight area.
2. Tap the intensity as a number between 0 and 255. 0 is no light and 255 is full.  

Intensity Exec LED

The background light of the executors on the console can be set. Follow these steps:

1. Tap the green square in the Intensity Exec LED area.
2. Tap the intensity as a number between 0 and 255. 0 is no light and 255 is full.  

Intensity Desk Lamp

The desklight on the console can be set. Follow these steps:

1. Tap the green square in the Intensity Desk Lamp area.
2. Tap the intensity as a number between 0 and 255. 0 is no light and 255 is full.  

Intensity 9 Inches

The backlight of the screens on the console can be set. Follow these steps to set the backlight of the 9-inch screens:

1. Tap the green square in the Intensity 9-inch area.
2. Tap the intensity as a number between 0 and 255. 0 is dark and 255 is bright.  

Intensity 15 Inches

The backlight of the screens on the console can be set. Follow these steps to set the backlight of the 15-inch screens:

1. Tap the green square in the Intensity 15-inch area.
2. Tap the intensity as a number between 0 and 255. 0 is dark and 255 is bright.  

Desklock background

It is possible to lock the console, so no faders and keys can be used, by pressing Pause on the keyboard or press and hold MA and press Fix. Desk Locked appears on the screen. To unlock the console, press Pause or press and hold MA and press Fix again. The background of the desklock screen can be set to either Black, Image Pool Picture or Current Desk UI

• Black will let the background be black.
• Image Pool Picture opens the Image Pool for the current show file, to select one of these to be the background.
• Current Desk UI leaves the screens as they are, but places a red Desk Locked sign above the content.

Select different version- latest - 3.3 3.4 3.5 3.6 3.7 3.8 3.9

  previous next

Open topic as PDF