- MA Network Switch
- Introduction
- Intended Use
- Dangers caused by Electric Current
- General Safety Instructions
- System Requirements
- SFP Transceiver Compatibility
- Device Overview
- Front Panel
- Rear Panel
- LED Indicators
- Factory Defaults
- First Steps
- Unpack the Device
- Install Mini-GBIC (SFP)
- Installation in a Rack
- Connect the Hardware
- Set the IP Address on the PC
- Access the Web Interface
- Display Navigation
- Groups View
- Name View
- Workload View
- LAG View
- Reset View
- Ports / Groups
- Change Port Description
- Assign Groups to Ports
- Edit LAGs
- Edit RSTP
- Edit Speed Setting
- Change Group Name
- Edit IGMP Snooping
- Edit IGMP Querier
- Edit Unknown Flooding
- Change VLAN ID
- Presets / Filters
- Assign Presets to Ports
- Apply Filters to Ports
- Create New Presets
- Update Presets
- Create New Filter
- View Filters
- Delete Presets
- Delete Filter
- General Settings
- Change Name
- Change ID
- Change DHCP Client
- Change IP Address
- Change Subnet Mask
- Change Default Gateway
- Change SNMP Status
- Change Password
- Update Firmware
- Fallback to Backup Firmware
- Get Switch Configuration
- Edit Port Mirroring
- Upload Switch Configuration
- Reset Settings
- Web Interface and grandMA2
- Specifications
- Support
- Glossary
- Introduction
Version 3.9
LED Indicators
The following tables shows the LED indicators for the MA Network Switch along with the explanation of each indicator.
Power LED
Status | Meaning |
---|---|
Off | No power |
Green | Power supply OK |
Red blink | Error |
Status LED
Status | Meaning |
---|---|
Green | All OK |
Green blink | Update |
Red | Error |
Link LED
Status | Meaning |
---|---|
Off | No link |
Green blink | Gigabit connection |
Orange blink | 10/100 Mbps connection |
Group LED
Status | Meaning |
---|---|
Red | Group 1 |
Yellow | Group 2 |
Green | Group 3 |
Cyan | Group 4 |
Blue | Group 5 |
Magenta | Group 6 |
White | Trunk |
Off | Manage |