- MA Network Switch
- Introduction
- Intended Use
- Dangers caused by Electric Current
- General Safety Instructions
- System Requirements
- SFP Transceiver Compatibility
- Device Overview
- Front Panel
- Rear Panel
- LED Indicators
- Factory Defaults
- First Steps
- Unpack the Device
- Install Mini-GBIC (SFP)
- Installation in a Rack
- Connect the Hardware
- Set the IP Address on the PC
- Access the Web Interface
- Display Navigation
- Groups View
- Workload View
- Reset View
- Ports / Groups
- Change Port Description
- Assign Groups to Ports
- Edit RSTP
- Edit Speed Setting
- Change Group Name
- Edit IGMP Snooping
- Edit IGMP Querier
- Edit Unknown Flooding
- Change VLAN ID
- Presets / Filters
- Assign Presets to Ports
- Apply Filters to Ports
- Create New Presets
- Update Presets
- Create New Filter
- View Filters
- Delete Presets
- Delete Filter
- General Settings
- Change Name
- Change ID
- Change DHCP Client
- Change IP Address
- Change Subnet Mask
- Change Default Gateway
- Change Password
- Update Firmware
- Fallback to Backup Firmware
- Get Switch Configuration
- Upload Switch Configuration
- Reset Settings
- Specifications
- Support
- Glossary
- Introduction
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Factory Defaults
Table of contents of this topic
The following tables describes the factory defaults and what will happen to various settings when you reset the switch.
If you want to reset the switch, refer to General Settings - Reset Settings.
General Settings Defaults
This table describes the general settings defaults and what will happen to the general settings when you reset the switch.
Reset mode | Items affected |
---|---|
Reset ALL settings to factory default by using the web interface - and - Hard reset with the menu button at the front panel |
|
Preset Defaults
The following lists describes what preset includes what filters by default and what will happen to the presets when you reset the switch.
Preset MA-Net2
The preset MA-Net2 contains the following filters by default:
- MA-Net2 crtl IPv4
- MA-Net2 data IPv4
Preset dot2-Net
The preset dot2-Net contains the following filters by default:
- dot2-Net wing data
- dot2-Net wing
- dot2-Net wing ctrl
- dot2-Net ctrl IPv6
- dot2-Net data IPv6
Preset Art-Net
The preset Art-Net contains the following filters by default:
- Art-Net
Preset MA-Remote
The preset MA-Remote contains the following filters by default:
- HTTPS (dport 443)
- HTTPS (sport 443)
- HTTP (dport 80)
- HTTP (sport 80)
- MA Webremote (dport 8080)
- MA Webremote (sport 8080)
- MA Remote (7003)
- MA Remote (7002)
- MA Remote (7001)
Preset MA-Net1
The preset MA-Net1 contains the following filters by default:
- MA-Net
Preset grandMA2
The preset grandMA2 contains the following filters by default:
- PSN
- DNS
- NTP
- SSH (dport 22)
- SSH (sport 22)
- syslog
- AVAHI
- SNMP trap
- SNMP
- KiNet
- Art-Net
- sACN
- MA-Net2 ctrl IPv4
- MA-Net2 data IPv4
- MIDI Show Control
- VPU remote (dport 7005)
- VPU remote (sport 7005)
- VPU remote (dport 7004)
- VPU remote (sport 7004)
- HTTPS (dport 443)
- HTTPS (sport 443)
- HTTP (dport 80)
- HTTP (sport 80)
- MA Webremote (dport 8080)
- MA Webremote (sport 8080)
- MA Remote (7003)
- MA Remote (7002)
- MA Remote (7001)
- Telnet (dport 30000)
- Telnet (sport 30000)
- Telnet (dport 23)
- Telnet (sport 23)
- nmbd (tcp)
- nmbd (udp)
- SMB (tcp 139)
- SMB (udp 138)
- SMB (udp 137)
- NFS (tcp)
- NFS (udp)
- FTP
- CITP MA
- CITP
- ShowNet
- PathPort
- ETC Net2
Preset sACN
The preset sACN contains the following filters by default:
- sACN
Filter Defaults
The following tables describes what filters exist by default along with their frame match and what will happen to the filters when you reset the switch.
Filter | Frame Match |
---|---|
PSN Standard | IPv4 UDP dport 56565 |
DNS | IPv4 UDP dport |
NTP | IPv4 UDP dport 123 |
SSH (dport 22) | IPv4 TCP sport 22 |
SSH (sport 22) | IPv4 TCP dport 22 |
syslog | IPv4 UDP dport 514 |
AVAHI | IPv4 UDP dport 5353 |
SNMP trap | IPv4 UDP dport 162 |
SNMP | IPv4 UDP dport 161 |
KiNet | IPv4 UDP dport 6038 |
Art-Net | IPv4 UDP dport 6454 |
sACN | IPv4 UDP dport 5568 |
MA-Net2 ctrl IPv4 | IPv4 UDP dport 29998 |
MA-Net2 data IPv4 | IPv4 UDP dport 29999 |
dot2-Net wing data | IPv6 UDP dport 30014 |
dot2-Net wing | IPv6 UDP dport 30013 |
dot2-Net wing ctrl | IPv6 UDP dport 30012 |
dot2-Net ctrl IPv6 | IPv6 UDP dport 30010 |
dot2-Net data IPv6 | IPv6 UDP dport 30011 |
MIDI Show Control | IPv4 UDP dport range 6000-6020 |
MA-Net | IPv4 UPD dport 9138 |
VPU remote (dport 7005) | TCP dport 7005 |
VPU remote (sport 7005) | TCP sport 7005 |
VPU remote (dport 7004) | TCP dport 7004 |
VPU remote (sport 7004) | TCP sport 7004 |
HTTPS (dport 443) | IPv4 TCP sport 443 |
HTTPS (sport 443) | IPv4 TCP dport 443 |
HTTP (dport 80) | IPv4 TCP sport 80 |
HTTP (sport 80) | IPv4 TCP dport 80 |
MA Webremote (dport 8080) | IPv4 TCP dport 8080 |
MA Webremote (sport 8080) | IPv4 TCP sport 8080 |
MA Remote (7003) | TCP dport 7003 |
MA Remote (7002) | TCP dport 7002 |
MA Remote (7001) | TCP dport 7001 |
Telnet (dport 30000) | TCP dport 30000 |
Telnet (sport 30000) | TCP sport 30000 |
Telnet (dport 30001) | TCP dport 30001 |
Telnet (sport 30001) | TCP sport 30001 |
Telnet (dport 23) | TCP dport 23 |
Telnet (sport 23) | TCP sport 23 |
nmbd (tcp) | IPv4 TCP dport 445 |
nmbd (udp) | IPv4 UDP dport 445 |
SMB (tcp 139) | TCP dport 139 |
SMB (udp 138) | UDP dport 138 |
SMB (udp 137) | UDP dport 137 |
NFS (tcp) | TCP dport 111 |
NFS (udp) | UDP dport 2049 |
FTP | TCP dport 21 |
CITP MA | TCP dport 30002 |
CITP | UDP dport 4809 |
ShowNet | UDP dport 2501 |
PathPort | UDP dport 3792 |
ETC Net2 | UDP dport 6107 |