• MA Network Switch
    • Introduction
      • Intended Use
      • Dangers caused by Electric Current
      • General Safety Instructions
      • System Requirements
      • SFP Transceiver Compatibility
    • Device Overview
      • Front Panel
      • Rear Panel
      • LED Indicators
      • Factory Defaults
    • First Steps
      • Unpack the Device
      • Install Mini-GBIC (SFP)
      • Installation in a Rack
      • Connect the Hardware
      • Set the IP Address on the PC
      • Access the Web Interface
    • Display Navigation
      • Groups View
      • Name View
      • Workload View
      • LAG View
      • Reset View
    • Ports / Groups
      • Change Port Description
      • Assign Groups to Ports
      • Edit LAGs
      • Edit RSTP
      • Edit Speed Setting
      • Change Group Name
      • Edit IGMP Snooping
      • Edit IGMP Querier
      • Edit Unknown Flooding
      • Change VLAN ID
    • Presets / Filters
      • Assign Presets to Ports
      • Apply Filters to Ports
      • Create New Presets
      • Update Presets
      • Create New Filter
      • View Filters
      • Delete Presets
      • Delete Filter
    • General Settings
      • Change Name
      • Change ID
      • Change DHCP Client
      • Change IP Address
      • Change Subnet Mask
      • Change Default Gateway
      • Change SNMP Status
      • Change Password
      • Update Firmware
      • Fallback to Backup Firmware
      • Get Switch Configuration
      • Edit Port Mirroring
      • Upload Switch Configuration
      • Reset Settings
      • Web Interface and grandMA2
    • Specifications
    • Support
    • Glossary
Select different version
 
Version 3.9

Display Navigation

The display offers basic information about the MA Network Switch.

Views consist of:

  • Title bar – displays the name of the view or MA Switch and the IP address.
  • Icons:


yellow_filter – If presets or filters are applied to a port, a yellow filter is displayed next to the group name.

red_r – If RSTP is disabled in a port, this icon is displayed next to the group name.

yellow_heart – If the port detects an MA device, this icon is displayed next to the group name. The icon indicates incoming MA-Net2.

white_heart –  The white heart icon indicates an incoming MA-Net3.

half_a_heart – The half a heart icon indicates that both MA-Net2 and MA-Net3 were found. 

The version of the MA Network Switch is displayed in the right corner at the bottom of the name view.

To change the view, press the menu button.




Sub topics

Select different version