grandMA2 User Manual
- New in the Manual
- Introduction
  - About this manual
  - System requirements grandMA2 onPC
  - Installation of grandMA2 onPC
  - Help from MA technical support
- Safety Information
  - Symbols used
  - Intended use
  - Dangers caused by electric current
  - General safety instructions
- Device Overview
  - grandMA2 console
  - grandMA2 replay unit (RPU)
  - grandMA2 fader wing
  - MA onPC command wing
  - MA onPC fader wing
- System Overview
  - Standalone systems
  - Network systems
    - What is the replay unit (RPU)
    - What is the network processing unit (NPU)
    - What is the MA video processing unit (VPU)
    - What is the network dimmer processor (NDP)
    - What is MA 3D
    - What are the MA nodes
  - Paramters vs. DMX channels
  - Parameter expansion
  - Big systems
  - Media systems and CITP
- First Steps
  - Unpack the device
  - Check scope of delivery
  - Position the device
  - Connect power
  - Connect desk lamps
  - Connect external screens
  - Connect USB mouse and USB keyboad
  - Connect DMX
  - Connect sound
  - Connect SMPTE (LTC)
  - Connect Ethernet
  - Connect analog remote control
  - Connect grandMA2 fader wing
  - Setup your PC
  - Turn on the console the first time
- Keys & Buttons on the Console
  - Key overview
  - >>> [GoFastForward]
  - <<< [GoFastBack]
  - . [Dot]
  - Align
  - Assign
  - At
  - Backg [Background]
  - Backup
  - Blind
  - Bt Pg +
  - Bt Pg -
  - B.O. [Blackout]
  - Channel
  - Ch Pg +
  - Ch Pg -
  - Clear
  - Copy
  - Cue
  - Del [Delete]
  - Down
  - Edit
  - Effect
  - [Encoder]
  - Esc
  - Exec [Executor]
  - Executor Buttons
  - Fd Pg +
  - Fd Pg -
  - Fix
  - Fixture
  - Freeze
  - Full
  - Go + [small]
  - Go + [large]
  - Go - [small]
  - Go - [large]
  - Goto
  - Group
  - Help
  - Highlt [Highlight]
  - If
  - Keyboard
  - Learn
  - List
  - MA
  - Macro
  - [Minus] -
  - Mouse
  - Move
  - Next
  - [Numeric]
  - Off
  - On
  - Oops
  - Page
  - Pause [small]
  - Pause [large]
  - Please
  - [Plus] +
  - Preset
  - Prev [Previous]
  - Prvw [Preview]
  - Select
  - Sequ [Sequence]
  - Set
  - Setup
  - Solo
  - Store
  - Temp
  - Thru
  - Time
  - Top
  - Tools
  - Up
  - Update
  - User 1
  - User 2
  - View
  - U1 - U4
  - V1 - V10
  - X1 - X20
- Workspace
  - User interface
    - Screen layout
    - User-defined area
    - Command line
    - X-Key labels
    - View buttons
    - Master section
    - Time control
  - Encoder bar
    - Preset control bar
    - Encoder toolbar
  - Encoder settings
  - Command wing bar
  - Command section
  - Mini executor bar
  - Work with views
  - Touch gestures
  - Calculator
  - Info
  - Oops and undo
  - Colors
    - System
    - Marker
    - Cue
  - Text indicators and symbols
  - Icons
  - Keyboard shortcuts
    - Turn on or turn off the keyboard shortcuts
    - Edit keyboard shortcuts
    - Add or delete keyboard shortcuts
    - Export or import keyboard shortcuts
- Windows in General
  - Create and manage basic windows
  - Clear the screen or delete windows
- Command Syntax and Keywords
  - General syntax rules
    - Helping keywords
    - Object keywords
    - Function keywords
  - All keywords
    - Special characters
    - <<< [GoFastBack]
    - >>> [GoFastForward]
    - - [Minus]
    - + [Plus]
    - AddUserVar
    - AddVar
    - Agenda
    - Alert
    - Align
    - AlignFaderModules
    - All
    - AllButtonExecutors
    - AllChaseExecutors
    - AllFaderExecutors
    - AllRows
    - AllSequExecutors
    - And
    - Appearance
    - Asterisk *
    - Assign
    - At
    - At @
    - Attribute
    - AutoCreate
    - Backup
    - Black
    - Blackout
    - BlackScreen
    - Blind
    - BlindEdit
    - Block
    - ButtonPage
    - Call
    - Camera
    - ChangeDest
    - Channel
    - ChannelFader
    - ChannelLink
    - ChannelPage
    - Chat
    - CircularCopy
    - Clear
    - ClearActive
    - ClearAll
    - ClearSelection
    - Clone
    - CmdDelay
    - CmdHelp
    - Copy
    - CrashLogCopy
    - CrashLogDelete
    - CrashLogList
    - Crossfade
    - CrossfadeA
    - CrossfadeB
    - Cue
    - Cut
    - Default
    - DefGoBack
    - DefGoForward
    - DefGoPause
    - Delay
    - Delete
    - DeleteShow
    - DisconnectStation
    - Dmx
    - Dollar $
    - DmxUniverse
    - Dot .
    - DoubleRate
    - DoubleSpeed
    - Down
    - DropControl
    - Edit
    - Effect
    - EffectAttack
    - EffectBPM
    - EffectDecay
    - EffectDelay
    - EffectFade
    - EffectForm
    - EffectHigh
    - EffectHZ
    - EffectID
    - EffectLow
    - EffectPhase
    - EffectSec
    - EffectSpeedGroup
    - EffectWidth
    - Empty
    - EndIf
    - EndSession
    - Escape
    - ExecButton1
    - ExecButton2
    - ExecButton3
    - Executor
    - Exit
    - Export
    - Extract
    - Fade
    - FadePath
    - Fader
    - FaderPage
    - Feature
    - Filter
    - Fix
    - Fixture
    - FixtureType
    - Flash
    - FlashGo
    - FlashOn
    - Flip
    - Form
    - Freeze
    - Full
    - FullHighlight
    - Gel
    - Go
    - GoBack
    - Goto
    - Group
    - HalfRate
    - HalfSpeed
    - Help
    - Highlight
    - IdentifyFaderModule
    - If
    - IfActive
    - IfOutput
    - IfProg
    - Image
    - Import
    - Info
    - Insert
    - Interleave
    - Invert
    - InviteStation
    - Item3D
    - JoinSession
    - Kill
    - Label
    - Layer
    - Layout
    - Learn
    - LeaveSession
    - List
    - ListEffectLibrary
    - ListFaderModules
    - ListLibrary
    - ListMacroLibrary
    - ListOops
    - ListOwner
    - ListPluginLibrary
    - ListShows
    - ListUpdate
    - ListUserVar
    - ListVar
    - Load
    - LoadNext
    - LoadPrev
    - LoadShow
    - Locate
    - Lock
    - Login
    - Logout
    - Lua
    - Macro
    - ManualXFade
    - Mask
    - Master
    - MasterFade
    - MAtricks
    - MAtricksBlocks
    - MAtricksFilter
    - MAtricksGroups
    - MAtricksInterleave
    - MAtricksReset
    - MAtricksWings
    - MediaServer
    - Menu
    - Message
    - Messages
    - MidiControl
    - MidiNote
    - MidiProgram
    - Model
    - Move
    - Move3D
    - NetworkInfo
    - NetworkNodeInfo
    - NetworkNodeUpdate
    - NetworkSpeedTest
    - NewShow
    - Next
    - NextRow
    - Normal
    - Off
    - On
    - Oops
    - Or
    - OutDelay
    - OutFade
    - Page
    - Parentheses ( )
    - Park
    - Part
    - Paste
    - Pause
    - Plugin
    - PMArea
    - Preset
    - PresetType
    - Preview
    - PreviewEdit
    - PreviewExecutor
    - Previous
    - PrevRow
    - Profile
    - Protocol
    - PSR
    - PSRList
    - Quotation marks " "
    - PSRPrepare
    - Rate
    - Rate1
    - RdmAutomatch
    - RdmAutopatch
    - RdmFixtureType
    - RdmInfo
    - RdmList
    - RdmSetParameter
    - RdmSetpatch
    - RdmUnmatch
    - Reboot
    - Record
    - Release
    - ReloadPlugins
    - Remote
    - RemoteCommand
    - Remove
    - RemoveIndividuals
    - Replace
    - ResetDmxSelection
    - ResetGuid
    - Restart
    - Root
    - Rotate3D
    - SaveShow
    - Screen
    - Search
    - SearchResult
    - Select
    - SelectDrive
    - Selection
    - Semicolon ;
    - SelFix
    - Sequence
    - SetHostname
    - SetIP
    - SetNetworkSpeed
    - Setup
    - SetUserVar
    - SetVar
    - ShuffleSelection
    - ShuffleValues
    - Shutdown
    - SnapPercent
    - Slash /
    - Solo
    - SpecialMaster
    - Square brackets [ ]
    - Speed
    - StepFade
    - StepInFade
    - StepOutFade
    - Stomp
    - Store
    - StoreLook
    - Surface
    - Swop
    - SwopGo
    - SwopOn
    - SyncEffects
    - TakeControl
    - Telnet
    - Temp
    - TempFader
    - Thru
    - Timecode
    - TimecodeSlot
    - Timer
    - ToFull
    - Toggle
    - Tools
    - Top
    - ToZero
    - Unblock
    - Unlock
    - Unpark
    - Up
    - Update
    - UpdateFirmware
    - UpdateSoftware
    - UpdateThumbnails
    - User
    - UserProfile
    - Value
    - Version
    - View
    - ViewButton
    - ViewPage
    - WebRemoteProgOnly
    - With
    - World
    - Zero
  - Work with lists
    - Object list
    - Selection list
    - Executor list
    - Attribute list
    - Station list
- Using the Backup Menu
  - New show
  - Load show
  - Save show
  - Save show as...
  - Delete shows
  - Using a USB stick
  - Setting up a file server
  - Partial show read
  - ASCII show read
  - Save as grandMA3
- Single User and Multi User Systems
  - The difference between a single user and a multi user system
  - Create user profiles and users
  - User settings
  - Login
- Networking
  - What is networking
  - Set the IP address in the console
  - Set the IP address in the onPC
  - Using DHCP in MA devices
  - Session control
    - How to create a session
    - Protecting the session and station
    - Adding devices to the session
    - How to end or leave a session
    - Session collision
  - Getting DMX in and out of the system
    - Setting up DMX ports on MA devices
    - Network DMX protocols
    - What affects my DMX output?
  - Using CITP
    - Streaming CITP
    - Thumbnail exchange
  - PosiStageNet (PSN)
  - FTP connection to console and NPU
- Patching, DMX, and Fixture Setup
  - What are channels & fixtures
    - Attributes
    - DMX break
  - What is 3D and stage setup
  - Adding fixtures to the show
  - Delete fixtures from the show
  - Working with layers
  - Multipatching
  - Live patching
  - DMX sheet
  - DMX testing
  - DMX and parameter lists
  - Universe pool
  - Stage view
  - Virtual 3D cameras
  - Position fixtures in the 3D stage
  - Auto calibrate fixture positions
- Basic Fixture Types
  - What are attributes, features & preset types
  - ColorMix vs. MixColor
  - Different fixture types
    - Conventional
    - LED
    - Mirror
    - Moving lights
    - Media server
    - Virtual fixtures
- Operate Fixtures
  - Channel sheet
  - Fixture sheet
  - Sheet options
    - Tools
    - Layer mask
    - Display
    - Title buttons
    - Assign executor
    - Mask (local)
  - Layers in sheets
    - Channel sheet and fixture sheet
    - Sequence content and sequence tracking sheet
  - What is the programmer
  - Encoder grouping
  - Using the color picker
  - Using the shaper dialog
  - Using the smart view
  - Edit a channel or fixture
- Pools in General
  - Manage pool objects
  - Adjust pool options
  - Call modes
- Groups
  - Create groups
  - Auto create groups
  - Using groups when programming
  - Choose copy method
  - Change specific group colors
  - Group masters
- Presets
  - What are special modes
  - Preset pools
  - Preset pool "Dynamic"
  - Create presets
  - Preset pool options
  - Create preset reference
  - Auto create presets
  - Auto create additional presets
  - Embedded presets
  - Edit presets
  - Update presets
  - Delete presets
- Cues and Sequences
  - What are cues and sequences
  - Looking at the cue sequence
  - Store cues
  - Store options and defaults
  - Cue timings
  - Renumber cues
  - Delete cues
  - Playing back cues
  - Looking at the cue content
  - Update cues
  - What is tracking
  - What is MIB
  - Sequence mini executor
  - Commands in cues
- Executors
  - What are executors
  - Executors on the screens
  - Assign a function
  - Looking at the active executors
  - Common executor options
- Advanced Sequence Functionality
  - Using different view sets in the sheets
  - Working with MIB
  - Using cue modes
  - Cue zero
  - Sequence info window
  - Looping cues
  - Cue path
- Advanced Executor Functionality
  - Executor pages
  - Channel pages
  - Executor options
  - Masters window
  - Special masters
    - Default masters
    - Grand masters
    - Speed masters
    - Rate masters
    - Playback masters
- Clone
  - Clone in user interface
  - Examples
  - Clone presets
- Search and Replace
  - Search
  - Replace
- Image Pool
  - Import images and videos
  - Image limitations & guidelines for symbols
  - Supported file formats
  - Delete images and videos
- Layouts
  - Create a layout
  - Layout pool options
  - Edit layout
  - Layout view options
- Worlds, Filters and Masks
  - What are worlds
  - Create worlds
  - Auto create worlds
  - Use worlds when programming
  - What are filters
  - Create filters
  - Use filters when programming
  - Use temporary filters
  - What are masks
  - Create masks
  - Use masks in the sheets
  - Apply worlds or filters to executors and sequences
- MAtricks
  - MAtricks toolbar
  - MAtricks pool
  - MAtricks interleave
  - MAtricks blocks
  - MAtricks wings
  - MAtricks groups
- Chasers
  - Create a chaser
  - Chaser settings
  - Chaser mini executor
- Effects
  - Use predefined effects
  - Use template and selective effects
  - Create an effect in the programmer
  - Create an effect that uses presets
  - Create effect forms
  - Pool options
  - Effects in a cue
  - Assign effect to executor
  - Live edit an effect
  - Running effects
  - Update effects
  - Delete effects
- Bitmap Fixture
  - Import bitmap fixture
  - Apply bitmap fixture in the layout
  - Control bitmap fixture
  - Edit bitmap fixture
  - Example
  - Priorities for bitmap effects
  - Disable bitmap for fixtures
- XYZ
  - XYZ vs. pan/tilt
  - XYZ and pan/tilt in cues and sequences
  - Use stage markers
  - Link objects to stage markers in MA 3D
- Remote Controlling the System
  - Remote input
  - MIDI show control (MSC)
  - Web remote
  - Telnet remote
  - Decimal – hex table
- Timecode
  - What is timecode and timecode shows
  - Record a timecode show
  - Edit a timecode show
  - Playing back a timecode show
  - Organize the show with multiple timecode shows
- Timer
  - Timer pool
  - Timer pool options
- Agenda
  - What is agenda
  - Create an appointment in the agenda
- Macros
  - What are macros
  - Manually create a macro
    - Use variables
    - Create pop-ups
    - Conditional expressions
    - Macro timing
  - Record a macro
  - Edit a macro
  - Command line interaction
  - Assign a macro to a key
  - Example macros
- Plugins
  - What is Lua
  - Edit plugins
- Partial Show Read
  - What is partial show read (PSR)
  - How to do a PSR
- RDM
  - Turn RDM on
  - Match RDM devices
  - Auto patch RDM devices
  - Work with RDM parameters
  - Work with RDM sensors
  - Configure RDM notifications
  - Use the RDM sheet
  - Unmatch RDM devices
  - Splitters and mergers that support RDM
  - Turn RDM off
  - RDM specific keywords
- DMX Profiles
- Other System Tools
  - Message center
  - Help
  - Clock
  - Sound input window
  - VPU pixel mapper view
  - Network dimmer
    - Views
    - Errors
    - Readout
    - Edit properties of a rack
    - Edit a module
  - Desk status
  - Performance window
  - System monitor
- Export and Import
  - Export by using command line
  - Export by using user interface
  - Import by using command line
  - Import by using user interface
  - Import predefined objects
- Update the Software
  - Update via setup
  - Format a USB stick for Linux
  - Update or factory reset via boot menu
  - Restart from Linux
- Advanced Fixture Types
  - Anatomy of a fixture type
    - Module manager
    - Instance manager
    - Wheel manager
  - Attribute & Encoder Grouping
- grandMA2 onPC Details
- Control the MA NDPs
  - Add the MA NDPs
  - Configure the MA NDPs
  - Delete the MA NDPs
- Control the MA Network Switch
  - Add MA Network Switch
  - Change IP address
  - Enable DHCP client
  - Change hostname
  - Change switch ID
  - Configure ports
  - Edit groups
  - Edit presets
  - Edit LAGs
  - Mirror ports
  - Work with the switch configuration
  - Disable SNMP
  - Change password
  - Update firmware
  - Reset to factory defaults
  - Delete MA Network Switch
- Control the MA xPort Nodes
  - Add the MA xPort Nodes
  - Configure the MA xPort Nodes in the console
  - Configure the MA xPort Nodes in a browser
  - Configure the MA xPort Nodes as splitters or mergers
  - Delete the MA xPort Nodes
- Console Settings
  - Adjust the intensity of desk lights
  - Change screen options
  - Local settings
  - Wing & monitor setup
  - Date & time
- Shut Down the System
- Error Messages
- Technical Data
- Glossary
grandMA3 Mode2
grandMA2 Quick Start Guide
grandMA2 Quick Manual onPC solutions
MA 3D
MA VPU
Release Notes

Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.

Version 3.4

Using CITP

Table of contents of this topic

hide

Enabling CITP
Important Information
- Some hints to keep network stability when using CITP:

CITP (Controller Interface Transport Protocol) is a suite of Protocols used to exchange pictures and Video streams through a network. It is developed and maintained by Capture, Sweden - http://www.citp-protocol.org/

The protocol suite supports many different things. The grandMA2 console and onPC only supports two elements of the protocol.

Thumbnail exchange from 3rd party media servers and viewing a CITP video stream.

Read about the two different types in the following pages or follow these links: Streaming CITP and Thumbnail Exchange.

The MA 3D supports one element (streaming CITP video).

Enabling CITP

CITP is enabled in Setup and CITP Network Configuration in the Network tab.

In this menu you can enabled CITP generally by tapping the CITP Enable. This will turn on CITP in your session.

Important Information

There are some things you should be aware of when using CITP.

A CITP connection is not possible in MA when running CITP sender and CITP receiver at the same computer.

The CITP Multicast address can be configured by pressing the title bar button in the CITP Network Configuration menu (in Setup). The CITP Multicast address 224.0.0.180 is not forwarded by many switches as soon as IGMP Snooping is enabled. The CITP Multicast address of MA products can be switched to 239.224.0.180 in order to use CITP in combination with IGMP Snooping. Be aware that the alternative multicast address 239.224.0.180 is not yet supported by many other media server manufacturers. Please check the compatibility with the manufacturer of your media server prior to changing the CITP Multicast address and enabling the IGMP Snooping while using CITP.

Changing the multicast address in the CITP Network Config, will change the address for all MA stations (consoles, MA VPU and MA 3D) throughout the session.

Streaming videos via network needs bandwidth. A single CITP video stream of 30fps generates up to 15Mbit/s. Video streams are sent as multicast. Requesting the same video stream from different grandMA2 consoles or MA 3Ds will not generate additional network traffic.

Some hints to keep network stability when using CITP:

The list below gives a brief overview over the data rate of one 30 Frames per second CITP video stream. When having compressed streams, the data rate varies depending on the compressibility of the video content.

Uncompressed RGB8 stream: 15Mbit/s
PNG compressed stream: 7Mbit/s up to 15Mbit/s depending on video content.
JPG compressed stream: 1Mbit/s up to 8Mbit/s depending on video content.

The minimum network speed is 1000MBit/s. Do not enable CITP in an 100Mbit/s network environment!

The maximum amount of CITP network data rate should not exceed 30Mbit/s per physical network. When exceeding this limit, reduce the video stream quality by choosing a higher compression (jpg) or request less different video streams. Otherwise visualizers and video stream viewers running at computers with installed operating system Microsoft® Windows® may not receive all video stream data resulting in CITP video stream fps dropping below 1 fps.

The MA VPU CITP video streams frame rate is limited to 30fps shared by all requested outputs and 10fps shared by all requested layers of CITP video streams. E.g.: When requesting CITP video streams of Output1 and Output2, each stream will have a maximum refresh rate of 15 fps.

The MA VPU reduces CITP video streams frame rate if the CITP network traffic of current connected network exceeds 30Mbit.