• grandMA2 User Manual
    • New in the Manual
    • Introduction
      • About this manual
      • System requirements grandMA2 onPC
      • Installation of grandMA2 onPC
      • Help from MA technical support
    • Safety Information
      • Symbols used
      • Intended use
      • Dangers caused by electric current
      • General safety instructions
    • Device Overview
      • grandMA2 console
      • grandMA2 replay unit (RPU)
      • grandMA2 fader wing
      • MA onPC command wing
      • MA onPC fader wing
    • System Overview
      • Standalone systems
      • Network systems
        • What is the replay unit (RPU)
        • What is the network processing unit (NPU)
        • What is the MA video processing unit (VPU)
        • What is the network dimmer processor (NDP)
        • What is MA 3D
        • What are the MA nodes
      • Parameters vs. DMX channels
      • Parameter expansion
      • Big systems
      • Media systems and CITP
    • First Steps
      • Unpack the device
      • Check scope of delivery
      • Position the device
      • Connect power
      • Connect desk lamps
      • Connect external screens
      • Connect USB mouse and USB keyboad
      • Connect DMX
      • Connect sound
      • Connect SMPTE (LTC)
      • Connect Ethernet
      • Connect analog remote control
      • Connect grandMA2 fader wing
      • Setup your PC
      • Turn on the console the first time
    • Keys & Buttons on the Console
      • Key overview
      • >>> [GoFastForward]
      • <<< [GoFastBack]
      • . [Dot]
      • Align
      • Assign
      • At
      • Backg [Background]
      • Backup
      • Blind
      • Bt Pg +
      • Bt Pg -
      • B.O. [Blackout]
      • Channel
      • Ch Pg +
      • Ch Pg -
      • Clear
      • Copy
      • Cue
      • Del [Delete]
      • Down
      • Edit
      • Effect
      • [Encoder]
      • Esc
      • Exec [Executor]
      • Executor Buttons
      • Fd Pg +
      • Fd Pg -
      • Fix
      • Fixture
      • Freeze
      • Full
      • Go + [small]
      • Go + [large]
      • Go - [small]
      • Go - [large]
      • Goto
      • Group
      • Help
      • Highlt [Highlight]
      • If
      • Keyboard
      • Learn
      • List
      • MA
      • Macro
      • [Minus] -
      • Mouse
      • Move
      • Next
      • [Numeric]
      • Off
      • On
      • Oops
      • Page
      • Pause [small]
      • Pause [large]
      • Please
      • [Plus] +
      • Preset
      • Prev [Previous]
      • Prvw [Preview]
      • Select
      • Sequ [Sequence]
      • Set
      • Setup
      • Solo
      • Store
      • Temp
      • Thru
      • Time
      • Top
      • Tools
      • Up
      • Update
      • User 1
      • User 2
      • View
      • U1 - U4
      • V1 - V10
      • X1 - X20
    • Workspace
      • User interface
        • Screen layout
        • User-defined area
        • Command line
        • X-Key labels
        • View buttons
        • Master section
        • Time control
      • Encoder bar
        • Preset control bar
        • Encoder toolbar
      • Encoder settings
      • Command wing bar
      • Command section
      • Mini executor bar
      • Work with views
      • Touch gestures
      • Calculator
      • Info
      • Oops and undo
      • Colors
        • System
        • Marker
        • Cue
      • Text indicators and symbols
      • Icons
      • Keyboard shortcuts
        • Turn on or turn off the keyboard shortcuts
        • Edit keyboard shortcuts
        • Add or delete keyboard shortcuts
        • Export or import keyboard shortcuts
    • Windows in General
      • Create and manage basic windows
      • Clear the screen or delete windows
    • Command Syntax and Keywords
      • General syntax rules
        • Helping keywords
        • Object keywords
        • Function keywords
      • All keywords
        • Special characters
        • <<< [GoFastBack]
        • >>> [GoFastForward]
        • - [Minus]
        • + [Plus]
        • AddUserVar
        • AddVar
        • Agenda
        • Alert
        • Align
        • AlignFaderModules
        • All
        • AllButtonExecutors
        • AllChaseExecutors
        • AllFaderExecutors
        • AllRows
        • AllSequExecutors
        • And
        • Appearance
        • Asterisk *
        • Assign
        • At
        • At @
        • Attribute
        • AutoCreate
        • Backup
        • Black
        • Blackout
        • BlackScreen
        • Blind
        • BlindEdit
        • Block
        • ButtonPage
        • Call
        • Camera
        • ChangeDest
        • Channel
        • ChannelFader
        • ChannelLink
        • ChannelPage
        • Chat
        • CircularCopy
        • Clear
        • ClearActive
        • ClearAll
        • ClearSelection
        • Clone
        • CmdDelay
        • CmdHelp
        • Copy
        • CrashLogCopy
        • CrashLogDelete
        • CrashLogList
        • Crossfade
        • CrossfadeA
        • CrossfadeB
        • Cue
        • Cut
        • Default
        • DefGoBack
        • DefGoForward
        • DefGoPause
        • Delay
        • Delete
        • DeleteShow
        • DisconnectStation
        • Dmx
        • Dollar $
        • DmxUniverse
        • Dot .
        • DoubleRate
        • DoubleSpeed
        • Down
        • DropControl
        • Edit
        • Effect
        • EffectAttack
        • EffectBPM
        • EffectDecay
        • EffectDelay
        • EffectFade
        • EffectForm
        • EffectHigh
        • EffectHZ
        • EffectID
        • EffectLow
        • EffectPhase
        • EffectSec
        • EffectSpeedGroup
        • EffectWidth
        • Empty
        • EndIf
        • EndSession
        • Escape
        • ExecButton1
        • ExecButton2
        • ExecButton3
        • Executor
        • Exit
        • Export
        • Extract
        • Fade
        • FadePath
        • Fader
        • FaderPage
        • Feature
        • Filter
        • Fix
        • Fixture
        • FixtureType
        • Flash
        • FlashGo
        • FlashOn
        • Flip
        • Form
        • Freeze
        • Full
        • FullHighlight
        • Gel
        • Go
        • GoBack
        • Goto
        • Group
        • HalfRate
        • HalfSpeed
        • Help
        • Highlight
        • IdentifyFaderModule
        • If
        • IfActive
        • IfOutput
        • IfProg
        • Image
        • Import
        • Info
        • Insert
        • Interleave
        • Invert
        • InviteStation
        • Item3D
        • JoinSession
        • Kill
        • Label
        • Layer
        • Layout
        • Learn
        • LeaveSession
        • List
        • ListEffectLibrary
        • ListFaderModules
        • ListLibrary
        • ListMacroLibrary
        • ListOops
        • ListOwner
        • ListPluginLibrary
        • ListShows
        • ListUpdate
        • ListUserVar
        • ListVar
        • Load
        • LoadNext
        • LoadPrev
        • LoadShow
        • Locate
        • Lock
        • Login
        • Logout
        • Lua
        • Macro
        • ManualXFade
        • Mask
        • Master
        • MasterFade
        • MAtricks
        • MAtricksBlocks
        • MAtricksFilter
        • MAtricksGroups
        • MAtricksInterleave
        • MAtricksReset
        • MAtricksWings
        • MediaServer
        • Menu
        • Message
        • Messages
        • MidiControl
        • MidiNote
        • MidiProgram
        • Model
        • Move
        • Move3D
        • NetworkInfo
        • NetworkNodeInfo
        • NetworkNodeUpdate
        • NetworkSpeedTest
        • NewShow
        • Next
        • NextRow
        • Normal
        • Off
        • On
        • Oops
        • Or
        • OutDelay
        • OutFade
        • Page
        • Parentheses ( )
        • Park
        • Part
        • Paste
        • Pause
        • Plugin
        • PMArea
        • Preset
        • PresetType
        • Preview
        • PreviewEdit
        • PreviewExecutor
        • Previous
        • PrevRow
        • Profile
        • Protocol
        • PSR
        • PSRList
        • PSRPrepare
        • Quotation marks " "
        • Rate
        • Rate1
        • RdmAutomatch
        • RdmAutopatch
        • RdmFixtureType
        • RdmInfo
        • RdmList
        • RdmSetParameter
        • RdmSetpatch
        • RdmUnmatch
        • Reboot
        • Record
        • Release
        • ReloadPlugins
        • Remote
        • RemoteCommand
        • Remove
        • RemoveIndividuals
        • Replace
        • ResetDmxSelection
        • ResetGuid
        • Restart
        • Root
        • Rotate3D
        • SaveShow
        • Screen
        • Search
        • SearchResult
        • Select
        • SelectDrive
        • Selection
        • SelFix
        • Semicolon ;
        • Sequence
        • SetHostname
        • SetIP
        • SetNetworkSpeed
        • Setup
        • SetUserVar
        • SetVar
        • ShuffleSelection
        • ShuffleValues
        • Shutdown
        • SnapPercent
        • Slash /
        • Solo
        • SpecialMaster
        • Square brackets [ ]
        • Speed
        • StepFade
        • StepInFade
        • StepOutFade
        • Stomp
        • Store
        • StoreLook
        • Surface
        • Swop
        • SwopGo
        • SwopOn
        • SyncEffects
        • TakeControl
        • Telnet
        • Temp
        • TempFader
        • Thru
        • Timecode
        • TimecodeSlot
        • Timer
        • ToFull
        • Toggle
        • Tools
        • Top
        • ToZero
        • Unblock
        • Unlock
        • Unpark
        • Up
        • Update
        • UpdateFirmware
        • UpdateSoftware
        • UpdateThumbnails
        • User
        • UserProfile
        • Value
        • Version
        • View
        • ViewButton
        • ViewPage
        • WebRemoteProgOnly
        • With
        • World
        • Zero
      • Work with lists
        • Object list
        • Selection list
        • Executor list
        • Attribute list
        • Station list
    • Using the Backup Menu
      • New show
      • Load show
      • Save show
      • Save show as...
      • Delete shows
      • Using a USB stick
      • Setting up a file server
      • Partial show read
      • ASCII show read
      • grandMA2 to grandMA3 show file converter
    • Single User and Multi User Systems
      • The difference between a single user and a multi user system
      • Create user profiles and users
      • User settings
      • Login
    • Networking
      • What is networking
      • Set the IP address in the console
      • Set the IP address in the onPC
      • Using DHCP in MA devices
      • Session control
        • How to create a session
        • Protecting the session and station
        • Adding devices to the session
        • How to end or leave a session
        • Session collision
      • Getting DMX in and out of the system
        • Setting up DMX ports on MA devices
        • Network DMX protocols
        • What affects my DMX output?
      • Using CITP
        • Streaming CITP
        • Thumbnail exchange
      • PosiStageNet (PSN)
      • FTP connection to console and NPU
    • Patching, DMX, and Fixture Setup
      • What are channels & fixtures
        • Attributes
        • DMX break
      • What is 3D and stage setup
      • Adding fixtures to the show
      • Delete fixtures from the show
      • Working with layers
      • Multipatching
      • Live patching
      • DMX sheet
      • DMX testing
      • DMX and parameter lists
      • Universe pool
      • Stage view
      • Virtual 3D cameras
      • Position fixtures in the 3D stage
      • Auto calibrate fixture positions
    • Basic Fixture Types
      • What are attributes, features & preset types
      • ColorMix vs. MixColor
      • Different fixture types
        • Conventional
        • LED
        • Mirror
        • Moving lights
        • Media server
        • Virtual fixtures
    • Operate Fixtures
      • Channel sheet
      • Fixture sheet
      • Sheet options
        • Tools
        • Layer mask
        • Display
        • Title buttons
        • Assign executor
        • Mask (local)
      • Layers in sheets
        • Channel sheet and fixture sheet
        • Sequence content and sequence tracking sheet
      • What is the programmer
      • Encoder grouping
      • Using the color picker
      • Using the shaper dialog
      • Using the smart view
      • Edit a channel or fixture
    • Pools in General
      • Manage pool objects
      • Adjust pool options
      • Call modes
    • Groups
      • Create groups
      • Auto create groups
      • Using groups when programming
      • Choose copy method
      • Change specific group colors
      • Group masters
    • Presets
      • What are special modes
      • Preset pools
      • Preset pool "Dynamic"
      • Create presets
      • Preset pool options
      • Create preset reference
      • Auto create presets
      • Auto create additional presets
      • Embedded presets
      • Edit presets
      • Update presets
      • Delete presets
    • Cues and Sequences
      • What are cues and sequences
      • Looking at the cue sequence
      • Store cues
      • Store options and defaults
      • Cue timings
      • Renumber cues
      • Delete cues
      • Playing back cues
      • Looking at the cue content
      • Update cues
      • What is tracking
      • What is MIB
      • Sequence mini executor
      • Commands in cues
    • Executors
      • What are executors
      • Executors on the screens
      • Assign a function
      • Looking at the active executors
      • Common executor options
    • Advanced Sequence Functionality
      • Using different view sets in the sheets
      • Working with MIB
      • Using cue modes
      • Cue zero
      • Sequence info window
      • Looping cues
      • Cue path
    • Advanced Executor Functionality
      • Executor pages
      • Channel pages
      • Executor options
      • Masters window
      • Special masters
        • Default masters
        • Grand masters
        • Speed masters
        • Rate masters
        • Playback masters
    • Clone
      • Clone in user interface
      • Examples
      • Clone presets
    • Search and Replace
      • Search
      • Replace
    • Image Pool
      • Import images and videos
      • Image limitations & guidelines for symbols
      • Supported file formats
      • Delete images and videos
    • Layouts
      • Create a layout
      • Layout pool options
      • Edit layout
      • Layout view options
    • Worlds, Filters and Masks
      • What are worlds
      • Create worlds
      • Auto create worlds
      • Use worlds when programming
      • What are filters
      • Create filters
      • Use filters when programming
      • Use temporary filters
      • What are masks
      • Create masks
      • Use masks in the sheets
      • Apply worlds or filters to executors and sequences
    • MAtricks
      • MAtricks toolbar
      • MAtricks pool
      • MAtricks interleave
      • MAtricks blocks
      • MAtricks wings
      • MAtricks groups
    • Chasers
      • Create a chaser
      • Chaser settings
      • Chaser mini executor
    • Effects
      • Use predefined effects
      • Use template and selective effects
      • Create an effect in the programmer
      • Create an effect that uses presets
      • Create effect forms
      • Pool options
      • Effects in a cue
      • Assign effect to executor
      • Live edit an effect
      • Running effects
      • Update effects
      • Delete effects
    • Bitmap Fixture
      • Import bitmap fixture
      • Apply bitmap fixture in the layout
      • Control bitmap fixture
      • Edit bitmap fixture
      • Example
      • Priorities for bitmap effects
      • Disable bitmap for fixtures
    • XYZ
      • XYZ vs. pan/tilt
      • XYZ and pan/tilt in cues and sequences
      • Use stage markers
      • Link objects to stage markers in MA 3D
    • Remote Controlling the System
      • Remote input
      • MIDI show control (MSC)
      • Web remote
      • Telnet remote
      • Decimal – hex table
    • Timecode
      • What is timecode and timecode shows
      • Record a timecode show
      • Edit a timecode show
      • Playing back a timecode show
      • Organize the show with multiple timecode shows
    • Timer
      • Timer pool
      • Timer pool options
    • Agenda
      • What is agenda
      • Create an appointment in the agenda
    • Macros
      • What are macros
      • Manually create a macro
        • Use variables
        • Create pop-ups
        • Conditional expressions
        • Macro timing
      • Record a macro
      • Edit a macro
      • Command line interaction
      • Assign a macro to a key
      • Example macros
    • Plugins
      • What is Lua
      • Edit plugins
    • Partial Show Read
      • What is partial show read (PSR)
      • How to do a PSR
    • RDM
      • Turn RDM on
      • Match RDM devices
      • Auto patch RDM devices
      • Work with RDM parameters
      • Work with RDM sensors
      • Configure RDM notifications
      • Use the RDM sheet
      • Unmatch RDM devices
      • Splitters and mergers that support RDM
      • Turn RDM off
      • RDM specific keywords
    • DMX Profiles
    • Other System Tools
      • Message center
      • Help
      • Clock
      • Sound input window
      • VPU pixel mapper view
      • Network dimmer
        • Views
        • Errors
        • Readout
        • Edit properties of a rack
        • Edit a module
      • Desk status
      • Performance window
      • System monitor
    • Export and Import
      • Export by using command line
      • Export by using user interface
      • Import by using command line
      • Import by using user interface
      • Import predefined objects
    • Update the Software
      • Update via setup
      • Format a USB stick for Linux
      • Update or factory reset via boot menu
      • Restart from Linux
    • Advanced Fixture Types
      • Anatomy of a fixture type
        • Module manager
        • Instance manager
        • Wheel manager
      • Attribute & Encoder Grouping
    • grandMA2 onPC Details
    • Control the MA NDPs
      • Add the MA NDPs
      • Configure the MA NDPs
      • Delete the MA NDPs
    • Control the MA Network Switch
      • Add MA Network Switch
      • Change IP address
      • Enable DHCP client
      • Change hostname
      • Change switch ID
      • Configure ports
      • Edit groups
      • Edit presets
      • Edit LAGs
      • Mirror ports
      • Work with the switch configuration
      • Disable SNMP
      • Change password
      • Update firmware
      • Reset to factory defaults
      • Delete MA Network Switch
    • Control the MA xPort Nodes
      • Add the MA xPort Nodes
      • Configure the MA xPort Nodes in the console
      • Configure the MA xPort Nodes in a browser
      • Configure the MA xPort Nodes as splitters or mergers
      • Delete the MA xPort Nodes
    • Console Settings
      • Adjust the intensity of desk lights
      • Change screen options
      • Local settings
      • Wing & monitor setup
      • Date & Time
    • Shut Down the System
    • Error Messages
    • Technical Data
    • Glossary
  • grandMA3 Mode2
  • grandMA2 Quick Start Guide
  • grandMA2 Quick Manual onPC solutions
  • MA 3D
  • MA VPU
  • Release Notes
Select different version
 
Version 3.9

System Requirements grandMA2 onPC

If you want to run the grandMA2 onPC your PC, here´s what it takes.

Type Minimum Recommended
Operation system Windows® 7  
  Windows® 8  
  Windows® 8.1  
  Windows® 10  
  Windows® 11  
  all with admin rights  
Processor CPU Dual Core 2.4 GHz or faster  
  with SSE2 support  
RAM 2 GB 8 GB
Hard disk 32 GB available space type SSD
Graphic card Any graphic card with hardware acceleration and 512 MB  
Resolution 1600 x 900 or higher 1920 x 1080
Network card 100BASE-TX, 1000BASE-T 1000BASE-T

IBM® compatible PC or notebook is necessary.

Additional requirements:

  • Make sure your Windows® always runs using the latest service pack and updates.
  • To save a grandMA2 show file as a grandMA3 show file, Windows® 10 is required. For more information see Save as grandMA3.
  • To use the online help and to download the latest version of grandMA2 onPC, you need internet access.
  • To save to a USB stick, you need a USB 2.0 or 3.0 port.

We recommend that you visit your PC manufacturer´s website for information about updated drivers and hardware compatibility.


Select different version