grandMA2 User Manual
- New in the Manual
- Introduction
  - About this manual
  - System requirements grandMA2 onPC
  - Installation of grandMA2 onPC
  - Help from MA technical support
- Safety Information
  - Symbols used
  - Intended use
  - Dangers caused by electric current
  - General safety instructions
- Device Overview
  - grandMA2 console
  - grandMA2 replay unit (RPU)
  - grandMA2 fader wing
  - MA onPC command wing
  - MA onPC fader wing
- System Overview
  - Standalone systems
  - Network systems
    - What is the replay unit (RPU)
    - What is the network processing unit (NPU)
    - What is the MA video processing unit (VPU)
    - What is the network dimmer processor (NDP)
    - What is MA 3D
    - What are the MA nodes
  - Paramters vs. DMX channels
  - Parameter expansion
  - Big systems
  - Media systems and CITP
- First Steps
  - Unpack the device
  - Check scope of delivery
  - Position the device
  - Connect power
  - Connect desk lamps
  - Connect external screens
  - Connect USB mouse and USB keyboad
  - Connect DMX
  - Connect sound
  - Connect SMPTE (LTC)
  - Connect Ethernet
  - Connect analog remote control
  - Connect grandMA2 fader wing
  - Setup your PC
  - Turn on the console the first time
- Keys & Buttons on the Console
  - Key overview
  - >>> [GoFastForward]
  - <<< [GoFastBack]
  - . [Dot]
  - Align
  - Assign
  - At
  - Backg [Background]
  - Backup
  - Blind
  - Bt Pg +
  - Bt Pg -
  - B.O. [Blackout]
  - Channel
  - Ch Pg +
  - Ch Pg -
  - Clear
  - Copy
  - Cue
  - Del [Delete]
  - Down
  - Edit
  - Effect
  - [Encoder]
  - Esc
  - Exec [Executor]
  - Executor Buttons
  - Fd Pg +
  - Fd Pg -
  - Fix
  - Fixture
  - Freeze
  - Full
  - Go + [small]
  - Go + [large]
  - Go - [small]
  - Go - [large]
  - Goto
  - Group
  - Help
  - Highlt [Highlight]
  - If
  - Keyboard
  - Learn
  - List
  - MA
  - Macro
  - [Minus] -
  - Mouse
  - Move
  - Next
  - [Numeric]
  - Off
  - On
  - Oops
  - Page
  - Pause [small]
  - Pause [large]
  - Please
  - [Plus] +
  - Preset
  - Prev [Previous]
  - Prvw [Preview]
  - Select
  - Sequ [Sequence]
  - Set
  - Setup
  - Solo
  - Store
  - Temp
  - Thru
  - Time
  - Top
  - Tools
  - Up
  - Update
  - User 1
  - User 2
  - View
  - U1 - U4
  - V1 - V10
  - X1 - X20
- Workspace
  - User interface
    - Screen layout
    - User-defined area
    - Command line
    - X-Key labels
    - View buttons
    - Master section
    - Time control
  - Encoder bar
    - Preset control bar
    - Encoder toolbar
  - Encoder settings
  - Command wing bar
  - Command section
  - Mini executor bar
  - Work with views
  - Touch gestures
  - Calculator
  - Info
  - Oops and undo
  - Colors
    - System
    - Marker
    - Cue
  - Text indicators and symbols
  - Icons
  - Keyboard shortcuts
    - Turn on or turn off the keyboard shortcuts
    - Edit keyboard shortcuts
    - Add or delete keyboard shortcuts
    - Export or import keyboard shortcuts
- Windows in General
  - Create and manage basic windows
  - Clear the screen or delete windows
- Command Syntax and Keywords
  - General syntax rules
    - Helping keywords
    - Object keywords
    - Function keywords
  - All keywords
    - Special characters
    - <<< [GoFastBack]
    - >>> [GoFastForward]
    - - [Minus]
    - + [Plus]
    - AddUserVar
    - AddVar
    - Agenda
    - Alert
    - Align
    - AlignFaderModules
    - All
    - AllButtonExecutors
    - AllChaseExecutors
    - AllFaderExecutors
    - AllRows
    - AllSequExecutors
    - And
    - Appearance
    - Asterisk *
    - Assign
    - At
    - At @
    - Attribute
    - AutoCreate
    - Backup
    - Black
    - Blackout
    - BlackScreen
    - Blind
    - BlindEdit
    - Block
    - ButtonPage
    - Call
    - Camera
    - ChangeDest
    - Channel
    - ChannelFader
    - ChannelLink
    - ChannelPage
    - Chat
    - CircularCopy
    - Clear
    - ClearActive
    - ClearAll
    - ClearSelection
    - Clone
    - CmdDelay
    - CmdHelp
    - Copy
    - CrashLogCopy
    - CrashLogDelete
    - CrashLogList
    - Crossfade
    - CrossfadeA
    - CrossfadeB
    - Cue
    - Cut
    - Default
    - DefGoBack
    - DefGoForward
    - DefGoPause
    - Delay
    - Delete
    - DeleteShow
    - DisconnectStation
    - Dmx
    - Dollar $
    - DmxUniverse
    - Dot .
    - DoubleRate
    - DoubleSpeed
    - Down
    - DropControl
    - Edit
    - Effect
    - EffectAttack
    - EffectBPM
    - EffectDecay
    - EffectDelay
    - EffectFade
    - EffectForm
    - EffectHigh
    - EffectHZ
    - EffectID
    - EffectLow
    - EffectPhase
    - EffectSec
    - EffectSpeedGroup
    - EffectWidth
    - Empty
    - EndIf
    - EndSession
    - Escape
    - ExecButton1
    - ExecButton2
    - ExecButton3
    - Executor
    - Exit
    - Export
    - Extract
    - Fade
    - FadePath
    - Fader
    - FaderPage
    - Feature
    - Filter
    - Fix
    - Fixture
    - FixtureType
    - Flash
    - FlashGo
    - FlashOn
    - Flip
    - Form
    - Freeze
    - Full
    - FullHighlight
    - Gel
    - Go
    - GoBack
    - Goto
    - Group
    - HalfRate
    - HalfSpeed
    - Help
    - Highlight
    - IdentifyFaderModule
    - If
    - IfActive
    - IfOutput
    - IfProg
    - Image
    - Import
    - Info
    - Insert
    - Interleave
    - Invert
    - InviteStation
    - Item3D
    - JoinSession
    - Kill
    - Label
    - Layer
    - Layout
    - Learn
    - LeaveSession
    - List
    - ListEffectLibrary
    - ListFaderModules
    - ListLibrary
    - ListMacroLibrary
    - ListOops
    - ListOwner
    - ListPluginLibrary
    - ListShows
    - ListUpdate
    - ListUserVar
    - ListVar
    - Load
    - LoadNext
    - LoadPrev
    - LoadShow
    - Locate
    - Lock
    - Login
    - Logout
    - Lua
    - Macro
    - ManualXFade
    - Mask
    - Master
    - MasterFade
    - MAtricks
    - MAtricksBlocks
    - MAtricksFilter
    - MAtricksGroups
    - MAtricksInterleave
    - MAtricksReset
    - MAtricksWings
    - MediaServer
    - Menu
    - Message
    - Messages
    - MidiControl
    - MidiNote
    - MidiProgram
    - Model
    - Move
    - Move3D
    - NetworkInfo
    - NetworkNodeInfo
    - NetworkNodeUpdate
    - NetworkSpeedTest
    - NewShow
    - Next
    - NextRow
    - Normal
    - Off
    - On
    - Oops
    - Or
    - OutDelay
    - OutFade
    - Page
    - Parentheses ( )
    - Park
    - Part
    - Paste
    - Pause
    - Plugin
    - PMArea
    - Preset
    - PresetType
    - Preview
    - PreviewEdit
    - PreviewExecutor
    - Previous
    - PrevRow
    - Profile
    - Protocol
    - PSR
    - PSRList
    - Quotation marks " "
    - PSRPrepare
    - Rate
    - Rate1
    - RdmAutomatch
    - RdmAutopatch
    - RdmFixtureType
    - RdmInfo
    - RdmList
    - RdmSetParameter
    - RdmSetpatch
    - RdmUnmatch
    - Reboot
    - Record
    - Release
    - ReloadPlugins
    - Remote
    - RemoteCommand
    - Remove
    - RemoveIndividuals
    - Replace
    - ResetDmxSelection
    - ResetGuid
    - Restart
    - Root
    - Rotate3D
    - SaveShow
    - Screen
    - Search
    - SearchResult
    - Select
    - SelectDrive
    - Selection
    - Semicolon ;
    - SelFix
    - Sequence
    - SetHostname
    - SetIP
    - SetNetworkSpeed
    - Setup
    - SetUserVar
    - SetVar
    - ShuffleSelection
    - ShuffleValues
    - Shutdown
    - SnapPercent
    - Slash /
    - Solo
    - SpecialMaster
    - Square brackets [ ]
    - Speed
    - StepFade
    - StepInFade
    - StepOutFade
    - Stomp
    - Store
    - StoreLook
    - Surface
    - Swop
    - SwopGo
    - SwopOn
    - SyncEffects
    - TakeControl
    - Telnet
    - Temp
    - TempFader
    - Thru
    - Timecode
    - TimecodeSlot
    - Timer
    - ToFull
    - Toggle
    - Tools
    - Top
    - ToZero
    - Unblock
    - Unlock
    - Unpark
    - Up
    - Update
    - UpdateFirmware
    - UpdateSoftware
    - UpdateThumbnails
    - User
    - UserProfile
    - Value
    - Version
    - View
    - ViewButton
    - ViewPage
    - WebRemoteProgOnly
    - With
    - World
    - Zero
  - Work with lists
    - Object list
    - Selection list
    - Executor list
    - Attribute list
    - Station list
- Using the Backup Menu
  - New show
  - Load show
  - Save show
  - Save show as...
  - Delete shows
  - Using a USB stick
  - Setting up a file server
  - Partial show read
  - ASCII show read
  - Save as grandMA3
- Single User and Multi User Systems
  - The difference between a single user and a multi user system
  - Create user profiles and users
  - User settings
  - Login
- Networking
  - What is networking
  - Set the IP address in the console
  - Set the IP address in the onPC
  - Using DHCP in MA devices
  - Session control
    - How to create a session
    - Protecting the session and station
    - Adding devices to the session
    - How to end or leave a session
    - Session collision
  - Getting DMX in and out of the system
    - Setting up DMX ports on MA devices
    - Network DMX protocols
    - What affects my DMX output?
  - Using CITP
    - Streaming CITP
    - Thumbnail exchange
  - PosiStageNet (PSN)
  - FTP connection to console and NPU
- Patching, DMX, and Fixture Setup
  - What are channels & fixtures
    - Attributes
    - DMX break
  - What is 3D and stage setup
  - Adding fixtures to the show
  - Delete fixtures from the show
  - Working with layers
  - Multipatching
  - Live patching
  - DMX sheet
  - DMX testing
  - DMX and parameter lists
  - Universe pool
  - Stage view
  - Virtual 3D cameras
  - Position fixtures in the 3D stage
  - Auto calibrate fixture positions
- Basic Fixture Types
  - What are attributes, features & preset types
  - ColorMix vs. MixColor
  - Different fixture types
    - Conventional
    - LED
    - Mirror
    - Moving lights
    - Media server
    - Virtual fixtures
- Operate Fixtures
  - Channel sheet
  - Fixture sheet
  - Sheet options
    - Tools
    - Layer mask
    - Display
    - Title buttons
    - Assign executor
    - Mask (local)
  - Layers in sheets
    - Channel sheet and fixture sheet
    - Sequence content and sequence tracking sheet
  - What is the programmer
  - Encoder grouping
  - Using the color picker
  - Using the shaper dialog
  - Using the smart view
  - Edit a channel or fixture
- Pools in General
  - Manage pool objects
  - Adjust pool options
  - Call modes
- Groups
  - Create groups
  - Auto create groups
  - Using groups when programming
  - Choose copy method
  - Change specific group colors
  - Group masters
- Presets
  - What are special modes
  - Preset pools
  - Preset pool "Dynamic"
  - Create presets
  - Preset pool options
  - Create preset reference
  - Auto create presets
  - Auto create additional presets
  - Embedded presets
  - Edit presets
  - Update presets
  - Delete presets
- Cues and Sequences
  - What are cues and sequences
  - Looking at the cue sequence
  - Store cues
  - Store options and defaults
  - Cue timings
  - Renumber cues
  - Delete cues
  - Playing back cues
  - Looking at the cue content
  - Update cues
  - What is tracking
  - What is MIB
  - Sequence mini executor
  - Commands in cues
- Executors
  - What are executors
  - Executors on the screens
  - Assign a function
  - Looking at the active executors
  - Common executor options
- Advanced Sequence Functionality
  - Using different view sets in the sheets
  - Working with MIB
  - Using cue modes
  - Cue zero
  - Sequence info window
  - Looping cues
  - Cue path
- Advanced Executor Functionality
  - Executor pages
  - Channel pages
  - Executor options
  - Masters window
  - Special masters
    - Default masters
    - Grand masters
    - Speed masters
    - Rate masters
    - Playback masters
- Clone
  - Clone in user interface
  - Examples
  - Clone presets
- Search and Replace
  - Search
  - Replace
- Image Pool
  - Import images and videos
  - Image limitations & guidelines for symbols
  - Supported file formats
  - Delete images and videos
- Layouts
  - Create a layout
  - Layout pool options
  - Edit layout
  - Layout view options
- Worlds, Filters and Masks
  - What are worlds
  - Create worlds
  - Auto create worlds
  - Use worlds when programming
  - What are filters
  - Create filters
  - Use filters when programming
  - Use temporary filters
  - What are masks
  - Create masks
  - Use masks in the sheets
  - Apply worlds or filters to executors and sequences
- MAtricks
  - MAtricks toolbar
  - MAtricks pool
  - MAtricks interleave
  - MAtricks blocks
  - MAtricks wings
  - MAtricks groups
- Chasers
  - Create a chaser
  - Chaser settings
  - Chaser mini executor
- Effects
  - Use predefined effects
  - Use template and selective effects
  - Create an effect in the programmer
  - Create an effect that uses presets
  - Create effect forms
  - Pool options
  - Effects in a cue
  - Assign effect to executor
  - Live edit an effect
  - Running effects
  - Update effects
  - Delete effects
- Bitmap Fixture
  - Import bitmap fixture
  - Apply bitmap fixture in the layout
  - Control bitmap fixture
  - Edit bitmap fixture
  - Example
  - Priorities for bitmap effects
  - Disable bitmap for fixtures
- XYZ
  - XYZ vs. pan/tilt
  - XYZ and pan/tilt in cues and sequences
  - Use stage markers
  - Link objects to stage markers in MA 3D
- Remote Controlling the System
  - Remote input
  - MIDI show control (MSC)
  - Web remote
  - Telnet remote
  - Decimal – hex table
- Timecode
  - What is timecode and timecode shows
  - Record a timecode show
  - Edit a timecode show
  - Playing back a timecode show
  - Organize the show with multiple timecode shows
- Timer
  - Timer pool
  - Timer pool options
- Agenda
  - What is agenda
  - Create an appointment in the agenda
- Macros
  - What are macros
  - Manually create a macro
    - Use variables
    - Create pop-ups
    - Conditional expressions
    - Macro timing
  - Record a macro
  - Edit a macro
  - Command line interaction
  - Assign a macro to a key
  - Example macros
- Plugins
  - What is Lua
  - Edit plugins
- Partial Show Read
  - What is partial show read (PSR)
  - How to do a PSR
- RDM
  - Turn RDM on
  - Match RDM devices
  - Auto patch RDM devices
  - Work with RDM parameters
  - Work with RDM sensors
  - Configure RDM notifications
  - Use the RDM sheet
  - Unmatch RDM devices
  - Splitters and mergers that support RDM
  - Turn RDM off
  - RDM specific keywords
- DMX Profiles
- Other System Tools
  - Message center
  - Help
  - Clock
  - Sound input window
  - VPU pixel mapper view
  - Network dimmer
    - Views
    - Errors
    - Readout
    - Edit properties of a rack
    - Edit a module
  - Desk status
  - Performance window
  - System monitor
- Export and Import
  - Export by using command line
  - Export by using user interface
  - Import by using command line
  - Import by using user interface
  - Import predefined objects
- Update the Software
  - Update via setup
  - Format a USB stick for Linux
  - Update or factory reset via boot menu
  - Restart from Linux
- Advanced Fixture Types
  - Anatomy of a fixture type
    - Module manager
    - Instance manager
    - Wheel manager
  - Attribute & Encoder Grouping
- grandMA2 onPC Details
- Control the MA NDPs
  - Add the MA NDPs
  - Configure the MA NDPs
  - Delete the MA NDPs
- Control the MA Network Switch
  - Add MA Network Switch
  - Change IP address
  - Enable DHCP client
  - Change hostname
  - Change switch ID
  - Configure ports
  - Edit groups
  - Edit presets
  - Edit LAGs
  - Mirror ports
  - Work with the switch configuration
  - Disable SNMP
  - Change password
  - Update firmware
  - Reset to factory defaults
  - Delete MA Network Switch
- Control the MA xPort Nodes
  - Add the MA xPort Nodes
  - Configure the MA xPort Nodes in the console
  - Configure the MA xPort Nodes in a browser
  - Configure the MA xPort Nodes as splitters or mergers
  - Delete the MA xPort Nodes
- Console Settings
  - Adjust the intensity of desk lights
  - Change screen options
  - Local settings
  - Wing & monitor setup
  - Date & time
- Shut Down the System
- Error Messages
- Technical Data
- Glossary
grandMA3 Mode2
grandMA2 Quick Start Guide
grandMA2 Quick Manual onPC solutions
MA 3D
MA VPU
Release Notes

Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.

Version 3.4

Setup your PC

Table of contents of this topic

hide

Turn on High Performance Power Plan
Optimize High Performance Power Options
Choose Windows® Design Classic
Disable the Screen Saver
Optimize System Settings
Assign grandMA2 onPC to the High Performance Graphic Card
Select dedicated AMD Graphic Card

To run grandMA2 onPC with the best result, we recommend to adjust the following settings on your PC.

Turn on High Performance Power Plan

To turn on the high performance power plan:

Click the Start button , and then click Control Panel. In the search box, type power options, and then click Power Options. Under Select a power plan, click Show additional plans, and then click High performance.

The high performance power plan is turned on.

Optimize High Performance Power Options

Turn off everything what can interrupt the grandMA2 onPC.

To optimize the power options:

Click Change plan settings, and then Change advance power settings.
Choose for turn off the hard disk, Never.
Choose for USB selective suspend setting, Disabled.
Click Save changes.

The power options are optimized.

Choose Windows® Design Classic

To conserve the graphic card resources, select the Windows® Classic design.

Click the Start button , and then click Control Panel. In the search box, type personalization, and then click Personalization. Under Basic and High Contrast Themes, click Windows® Classic.

The Windows Classic design is selected.

Disable the Screen Saver

To conserve the graphic card resources, disable the screen saver.

Click the Start button , and then click Control Panel. In the search box, type personalization, and then click Personalization. Click Screen Saver, and select in the drop down None.

The screen saver is disabled.

Optimize System Settings

To optimize the system settings:

Click the Start button , and then click Control Panel. In the search box, type system, and then click System. Click Advanced system settings, and select the tab Advanced, click under Performance, Settings... .
Select tab Advanced and click Background service.
For low performance graphic cards only:
Select tab Visual Effects and change the performance options to best performance.
Click Adjust for best performance.

The system settings are optimized.

Assign grandMA2 onPC to the High Performance Graphic Card

Information:
Only if the PC has a on-board graphic card and an additional High Performance Graphic card.

To assign the grandMA2 onPC software to the high performance graphic card:

Open the Control Panel of the high performance graphic card. For more information, see the manual of the high performance graphic card.

The grandMA2 onPC software is assigned to the high performance graphic card.

Select dedicated AMD Graphic Card

Information:
Only if you have an integrated Intel HD graphic card and a dedicated AMD graphic card in your computer, it is necessary to select the dedicated AMD graphic card manually.

To select the dedicated AMD graphic card:

Right mouse click on desktop and select Catalyst Graphics Properties.
Click under Power at Switchable Graphics Application Settings.
Click at All Applications.
Search for grandMA2 onPC and select in the drop down menu under Graphic Settings High Performance.
Click Apply.

grandMA2 onPC is using the dedicated AMD graphic card.