• grandMA2 User Manual
    • New in the Manual
    • Introduction
      • About this manual
      • System requirements grandMA2 onPC
      • Installation of grandMA2 onPC
      • Help from MA technical support
    • Safety Information
      • Symbols used
      • Intended use
      • Dangers caused by electric current
      • General safety instructions
    • Device Overview
      • grandMA2 console
      • grandMA2 replay unit (RPU)
      • grandMA2 fader wing
      • MA onPC command wing
      • MA onPC fader wing
    • System Overview
      • Standalone systems
      • Network systems
        • What is the replay unit (RPU)
        • What is the network processing unit (NPU)
        • What is the MA video processing unit (VPU)
        • What is the network dimmer processor (NDP)
        • What is MA 3D
        • What are the MA nodes
      • Parameters vs. DMX channels
      • Parameter expansion
      • Big systems
      • Media systems and CITP
    • First Steps
      • Unpack the device
      • Check scope of delivery
      • Position the device
      • Connect power
      • Connect desk lamps
      • Connect external screens
      • Connect USB mouse and USB keyboad
      • Connect DMX
      • Connect sound
      • Connect SMPTE (LTC)
      • Connect Ethernet
      • Connect analog remote control
      • Connect grandMA2 fader wing
      • Setup your PC
      • Turn on the console the first time
    • Keys & Buttons on the Console
      • Key overview
      • >>> [GoFastForward]
      • <<< [GoFastBack]
      • . [Dot]
      • Align
      • Assign
      • At
      • Backg [Background]
      • Backup
      • Blind
      • Bt Pg +
      • Bt Pg -
      • B.O. [Blackout]
      • Channel
      • Ch Pg +
      • Ch Pg -
      • Clear
      • Copy
      • Cue
      • Del [Delete]
      • Down
      • Edit
      • Effect
      • [Encoder]
      • Esc
      • Exec [Executor]
      • Executor Buttons
      • Fd Pg +
      • Fd Pg -
      • Fix
      • Fixture
      • Freeze
      • Full
      • Go + [small]
      • Go + [large]
      • Go - [small]
      • Go - [large]
      • Goto
      • Group
      • Help
      • Highlt [Highlight]
      • If
      • Keyboard
      • Learn
      • List
      • MA
      • Macro
      • [Minus] -
      • Mouse
      • Move
      • Next
      • [Numeric]
      • Off
      • On
      • Oops
      • Page
      • Pause [small]
      • Pause [large]
      • Please
      • [Plus] +
      • Preset
      • Prev [Previous]
      • Prvw [Preview]
      • Select
      • Sequ [Sequence]
      • Set
      • Setup
      • Solo
      • Store
      • Temp
      • Thru
      • Time
      • Top
      • Tools
      • Up
      • Update
      • User 1
      • User 2
      • View
      • U1 - U4
      • V1 - V10
      • X1 - X20
    • Workspace
      • User interface
        • Screen layout
        • User-defined area
        • Command line
        • X-Key labels
        • View buttons
        • Master section
        • Time control
      • Encoder bar
        • Preset control bar
        • Encoder toolbar
      • Encoder settings
      • Command wing bar
      • Command section
      • Mini executor bar
      • Work with views
      • Touch gestures
      • Calculator
      • Info
      • Oops and undo
      • Colors
        • System
        • Marker
        • Cue
      • Text indicators and symbols
      • Icons
      • Keyboard shortcuts
        • Turn on or turn off the keyboard shortcuts
        • Edit keyboard shortcuts
        • Add or delete keyboard shortcuts
        • Export or import keyboard shortcuts
    • Windows in General
      • Create and manage basic windows
      • Clear the screen or delete windows
    • Command Syntax and Keywords
      • General syntax rules
        • Helping keywords
        • Object keywords
        • Function keywords
      • All keywords
        • Special characters
        • <<< [GoFastBack]
        • >>> [GoFastForward]
        • - [Minus]
        • + [Plus]
        • AddUserVar
        • AddVar
        • Agenda
        • Alert
        • Align
        • AlignFaderModules
        • All
        • AllButtonExecutors
        • AllChaseExecutors
        • AllFaderExecutors
        • AllRows
        • AllSequExecutors
        • And
        • Appearance
        • Asterisk *
        • Assign
        • At
        • At @
        • Attribute
        • AutoCreate
        • Backup
        • Black
        • Blackout
        • BlackScreen
        • Blind
        • BlindEdit
        • Block
        • ButtonPage
        • Call
        • Camera
        • ChangeDest
        • Channel
        • ChannelFader
        • ChannelLink
        • ChannelPage
        • Chat
        • CircularCopy
        • Clear
        • ClearActive
        • ClearAll
        • ClearSelection
        • Clone
        • CmdDelay
        • CmdHelp
        • Copy
        • CrashLogCopy
        • CrashLogDelete
        • CrashLogList
        • Crossfade
        • CrossfadeA
        • CrossfadeB
        • Cue
        • Cut
        • Default
        • DefGoBack
        • DefGoForward
        • DefGoPause
        • Delay
        • Delete
        • DeleteShow
        • DisconnectStation
        • Dmx
        • Dollar $
        • DmxUniverse
        • Dot .
        • DoubleRate
        • DoubleSpeed
        • Down
        • DropControl
        • Edit
        • Effect
        • EffectAttack
        • EffectBPM
        • EffectDecay
        • EffectDelay
        • EffectFade
        • EffectForm
        • EffectHigh
        • EffectHZ
        • EffectID
        • EffectLow
        • EffectPhase
        • EffectSec
        • EffectSpeedGroup
        • EffectWidth
        • Empty
        • EndIf
        • EndSession
        • Escape
        • ExecButton1
        • ExecButton2
        • ExecButton3
        • Executor
        • Exit
        • Export
        • Extract
        • Fade
        • FadePath
        • Fader
        • FaderPage
        • Feature
        • Filter
        • Fix
        • Fixture
        • FixtureType
        • Flash
        • FlashGo
        • FlashOn
        • Flip
        • Form
        • Freeze
        • Full
        • FullHighlight
        • Gel
        • Go
        • GoBack
        • Goto
        • Group
        • HalfRate
        • HalfSpeed
        • Help
        • Highlight
        • IdentifyFaderModule
        • If
        • IfActive
        • IfOutput
        • IfProg
        • Image
        • Import
        • Info
        • Insert
        • Interleave
        • Invert
        • InviteStation
        • Item3D
        • JoinSession
        • Kill
        • Label
        • Layer
        • Layout
        • Learn
        • LeaveSession
        • List
        • ListEffectLibrary
        • ListFaderModules
        • ListLibrary
        • ListMacroLibrary
        • ListOops
        • ListOwner
        • ListPluginLibrary
        • ListShows
        • ListUpdate
        • ListUserVar
        • ListVar
        • Load
        • LoadNext
        • LoadPrev
        • LoadShow
        • Locate
        • Lock
        • Login
        • Logout
        • Lua
        • Macro
        • ManualXFade
        • Mask
        • Master
        • MasterFade
        • MAtricks
        • MAtricksBlocks
        • MAtricksFilter
        • MAtricksGroups
        • MAtricksInterleave
        • MAtricksReset
        • MAtricksWings
        • MediaServer
        • Menu
        • Message
        • Messages
        • MidiControl
        • MidiNote
        • MidiProgram
        • Model
        • Move
        • Move3D
        • NetworkInfo
        • NetworkNodeInfo
        • NetworkNodeUpdate
        • NetworkSpeedTest
        • NewShow
        • Next
        • NextRow
        • Normal
        • Off
        • On
        • Oops
        • Or
        • OutDelay
        • OutFade
        • Page
        • Parentheses ( )
        • Park
        • Part
        • Paste
        • Pause
        • Plugin
        • PMArea
        • Preset
        • PresetType
        • Preview
        • PreviewEdit
        • PreviewExecutor
        • Previous
        • PrevRow
        • Profile
        • Protocol
        • PSR
        • PSRList
        • PSRPrepare
        • Quotation marks " "
        • Rate
        • Rate1
        • RdmAutomatch
        • RdmAutopatch
        • RdmFixtureType
        • RdmInfo
        • RdmList
        • RdmSetParameter
        • RdmSetpatch
        • RdmUnmatch
        • Reboot
        • Record
        • Release
        • ReloadPlugins
        • Remote
        • RemoteCommand
        • Remove
        • RemoveIndividuals
        • Replace
        • ResetDmxSelection
        • ResetGuid
        • Restart
        • Root
        • Rotate3D
        • SaveShow
        • Screen
        • Search
        • SearchResult
        • Select
        • SelectDrive
        • Selection
        • SelFix
        • Semicolon ;
        • Sequence
        • SetHostname
        • SetIP
        • SetNetworkSpeed
        • Setup
        • SetUserVar
        • SetVar
        • ShuffleSelection
        • ShuffleValues
        • Shutdown
        • SnapPercent
        • Slash /
        • Solo
        • SpecialMaster
        • Square brackets [ ]
        • Speed
        • StepFade
        • StepInFade
        • StepOutFade
        • Stomp
        • Store
        • StoreLook
        • Surface
        • Swop
        • SwopGo
        • SwopOn
        • SyncEffects
        • TakeControl
        • Telnet
        • Temp
        • TempFader
        • Thru
        • Timecode
        • TimecodeSlot
        • Timer
        • ToFull
        • Toggle
        • Tools
        • Top
        • ToZero
        • Unblock
        • Unlock
        • Unpark
        • Up
        • Update
        • UpdateFirmware
        • UpdateSoftware
        • UpdateThumbnails
        • User
        • UserProfile
        • Value
        • Version
        • View
        • ViewButton
        • ViewPage
        • WebRemoteProgOnly
        • With
        • World
        • Zero
      • Work with lists
        • Object list
        • Selection list
        • Executor list
        • Attribute list
        • Station list
    • Using the Backup Menu
      • New show
      • Load show
      • Save show
      • Save show as...
      • Delete shows
      • Using a USB stick
      • Setting up a file server
      • Partial show read
      • ASCII show read
      • Save as grandMA3
    • Single User and Multi User Systems
      • The difference between a single user and a multi user system
      • Create user profiles and users
      • User settings
      • Login
    • Networking
      • What is networking
      • Set the IP address in the console
      • Set the IP address in the onPC
      • Using DHCP in MA devices
      • Session control
        • How to create a session
        • Protecting the session and station
        • Adding devices to the session
        • How to end or leave a session
        • Session collision
      • Getting DMX in and out of the system
        • Setting up DMX ports on MA devices
        • Network DMX protocols
        • What affects my DMX output?
      • Using CITP
        • Streaming CITP
        • Thumbnail exchange
      • PosiStageNet (PSN)
      • FTP connection to console and NPU
    • Patching, DMX, and Fixture Setup
      • What are channels & fixtures
        • Attributes
        • DMX break
      • What is 3D and stage setup
      • Adding fixtures to the show
      • Delete fixtures from the show
      • Working with layers
      • Multipatching
      • Live patching
      • DMX sheet
      • DMX testing
      • DMX and parameter lists
      • Universe pool
      • Stage view
      • Virtual 3D cameras
      • Position fixtures in the 3D stage
      • Auto calibrate fixture positions
    • Basic Fixture Types
      • What are attributes, features & preset types
      • ColorMix vs. MixColor
      • Different fixture types
        • Conventional
        • LED
        • Mirror
        • Moving lights
        • Media server
        • Virtual fixtures
    • Operate Fixtures
      • Channel sheet
      • Fixture sheet
      • Sheet options
        • Tools
        • Layer mask
        • Display
        • Title buttons
        • Assign executor
        • Mask (local)
      • Layers in sheets
        • Channel sheet and fixture sheet
        • Sequence content and sequence tracking sheet
      • What is the programmer
      • Encoder grouping
      • Using the color picker
      • Using the shaper dialog
      • Using the smart view
      • Edit a channel or fixture
    • Pools in General
      • Manage pool objects
      • Adjust pool options
      • Call modes
    • Groups
      • Create groups
      • Auto create groups
      • Using groups when programming
      • Choose copy method
      • Change specific group colors
      • Group masters
    • Presets
      • What are special modes
      • Preset pools
      • Preset pool "Dynamic"
      • Create presets
      • Preset pool options
      • Create preset reference
      • Auto create presets
      • Auto create additional presets
      • Embedded presets
      • Edit presets
      • Update presets
      • Delete presets
    • Cues and Sequences
      • What are cues and sequences
      • Looking at the cue sequence
      • Store cues
      • Store options and defaults
      • Cue timings
      • Renumber cues
      • Delete cues
      • Playing back cues
      • Looking at the cue content
      • Update cues
      • What is tracking
      • What is MIB
      • Sequence mini executor
      • Commands in cues
    • Executors
      • What are executors
      • Executors on the screens
      • Assign a function
      • Looking at the active executors
      • Common executor options
    • Advanced Sequence Functionality
      • Using different view sets in the sheets
      • Working with MIB
      • Using cue modes
      • Cue zero
      • Sequence info window
      • Looping cues
      • Cue path
    • Advanced Executor Functionality
      • Executor pages
      • Channel pages
      • Executor options
      • Masters window
      • Special masters
        • Default masters
        • Grand masters
        • Speed masters
        • Rate masters
        • Playback masters
    • Clone
      • Clone in user interface
      • Examples
      • Clone presets
    • Search and Replace
      • Search
      • Replace
    • Image Pool
      • Import images and videos
      • Image limitations & guidelines for symbols
      • Supported file formats
      • Delete images and videos
    • Layouts
      • Create a layout
      • Layout pool options
      • Edit layout
      • Layout view options
    • Worlds, Filters and Masks
      • What are worlds
      • Create worlds
      • Auto create worlds
      • Use worlds when programming
      • What are filters
      • Create filters
      • Use filters when programming
      • Use temporary filters
      • What are masks
      • Create masks
      • Use masks in the sheets
      • Apply worlds or filters to executors and sequences
    • MAtricks
      • MAtricks toolbar
      • MAtricks pool
      • MAtricks interleave
      • MAtricks blocks
      • MAtricks wings
      • MAtricks groups
    • Chasers
      • Create a chaser
      • Chaser settings
      • Chaser mini executor
    • Effects
      • Use predefined effects
      • Use template and selective effects
      • Create an effect in the programmer
      • Create an effect that uses presets
      • Create effect forms
      • Pool options
      • Effects in a cue
      • Assign effect to executor
      • Live edit an effect
      • Running effects
      • Update effects
      • Delete effects
    • Bitmap Fixture
      • Import bitmap fixture
      • Apply bitmap fixture in the layout
      • Control bitmap fixture
      • Edit bitmap fixture
      • Example
      • Priorities for bitmap effects
      • Disable bitmap for fixtures
    • XYZ
      • XYZ vs. pan/tilt
      • XYZ and pan/tilt in cues and sequences
      • Use stage markers
      • Link objects to stage markers in MA 3D
    • Remote Controlling the System
      • Remote input
      • MIDI show control (MSC)
      • Web remote
      • Telnet remote
      • Decimal – hex table
    • Timecode
      • What is timecode and timecode shows
      • Record a timecode show
      • Edit a timecode show
      • Playing back a timecode show
      • Organize the show with multiple timecode shows
    • Timer
      • Timer pool
      • Timer pool options
    • Agenda
      • What is agenda
      • Create an appointment in the agenda
    • Macros
      • What are macros
      • Manually create a macro
        • Use variables
        • Create pop-ups
        • Conditional expressions
        • Macro timing
      • Record a macro
      • Edit a macro
      • Command line interaction
      • Assign a macro to a key
      • Example macros
    • Plugins
      • What is Lua
      • Edit plugins
    • Partial Show Read
      • What is partial show read (PSR)
      • How to do a PSR
    • RDM
      • Turn RDM on
      • Match RDM devices
      • Auto patch RDM devices
      • Work with RDM parameters
      • Work with RDM sensors
      • Configure RDM notifications
      • Use the RDM sheet
      • Unmatch RDM devices
      • Splitters and mergers that support RDM
      • Turn RDM off
      • RDM specific keywords
    • DMX Profiles
    • Other System Tools
      • Message center
      • Help
      • Clock
      • Sound input window
      • VPU pixel mapper view
      • Network dimmer
        • Views
        • Errors
        • Readout
        • Edit properties of a rack
        • Edit a module
      • Desk status
      • Performance window
      • System monitor
    • Export and Import
      • Export by using command line
      • Export by using user interface
      • Import by using command line
      • Import by using user interface
      • Import predefined objects
    • Update the Software
      • Update via setup
      • Format a USB stick for Linux
      • Update or factory reset via boot menu
      • Restart from Linux
    • Advanced Fixture Types
      • Anatomy of a fixture type
        • Module manager
        • Instance manager
        • Wheel manager
      • Attribute & Encoder Grouping
    • grandMA2 onPC Details
    • Control the MA NDPs
      • Add the MA NDPs
      • Configure the MA NDPs
      • Delete the MA NDPs
    • Control the MA Network Switch
      • Add MA Network Switch
      • Change IP address
      • Enable DHCP client
      • Change hostname
      • Change switch ID
      • Configure ports
      • Edit groups
      • Edit presets
      • Edit LAGs
      • Mirror ports
      • Work with the switch configuration
      • Disable SNMP
      • Change password
      • Update firmware
      • Reset to factory defaults
      • Delete MA Network Switch
    • Control the MA xPort Nodes
      • Add the MA xPort Nodes
      • Configure the MA xPort Nodes in the console
      • Configure the MA xPort Nodes in a browser
      • Configure the MA xPort Nodes as splitters or mergers
      • Delete the MA xPort Nodes
    • Console Settings
      • Adjust the intensity of desk lights
      • Change screen options
      • Local settings
      • Wing & monitor setup
      • Date & time
    • Shut Down the System
    • Error Messages
    • Technical Data
    • Glossary
  • grandMA3 Mode2
  • grandMA2 Quick Start Guide
  • grandMA2 Quick Manual onPC solutions
  • MA 3D
  • MA VPU
  • Release Notes
Select different version
 
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 3.8

Looking at the Cue Sequence

If your show has sequences with multiple cues, then it is very useful to be able to see the sequence and see the active cue and the settings for the cue change.

There are several ways to see what cue is running. This topic describes views that do not show the values stored in the cues, but they show the list of cues. To see the content of the cues please read the Looking at the Cue Content topic.

Sequence Executor Sheet

The most common way to look at the Cue Sequence is the Sequence Executor Sheet. It is a window that can be made using the Create Basic Window pop-up. It could look like this:

Sequence Executor Sheet

This sheet has a lot of columns. Each column is a setting, information, or action that has to do with each of the cues.

The cues are represented by rows in the sheet.

The active cue will have a yellow frame around it. If a cue is split up into different parts then the "main" cue and the parts all have the yellow frame around them.

The sheet can be customized to display only the relevant columns and the columns can be arranged just like you prefer it - this functionality is described in the Using different view sets in the sheets topic.

The width of a column can be changed. This is done by placing the mouse pointer on the line between two column. When the pointer is the right place then it changes shape and gets a double ended arrow. Then do a left click and hold it while moving the mouse in the direction you wish to change the column. A white box appears above the pointer showing the size of the column and the size change is written in the parentheses. It could look like this:

Changing the column width

This can also be done using the touch screens and fingers, but it can be easier with the mouse or trackball.

The sheet can be customized and title buttons changed using the Sheet Options - read about them in the Sheet Options topics.

The different columns in the Sequence Executor Sheet

There are many columns in this sheet. The following is a short description of them. The ones that takes a little bit more explaining have links to the relevant topics.

If you cannot see all the columns in your sheet then try to tap the "All" button in the title bar or a blank one. If you do not have any of these, then follow the link above to read about using the view sets.

  • Number:
    This is the cue number.
  • Name:
    This is the name of the cue.
  • Trig:
    This is the cue trigger. The options here are explained in the Playing back Cues topic.
  • Trig Time:
    This is connected to the trigger. Follow the link above for more information.
  • Fade:
    This is the fade time for all non-snap attributes and dimmer values that does up in value. The Cue Timings topic describes all the different timing columns and their effect on the cue values.
  • Out Fade:
    This is the fade time for dimmer values that does down in value. This is default set to the same as the "Fade" time.
  • Delay:
    This is the delay or wait time between the trigger and the actual fade begins.
  • Out Delay:
    This is the delay for the Out Fade (only dimmer values). Its default value is the "Delay".
  • Snap Percent:
    This can be used to control when "Snap" attributes changes values. It is a percent related to the fade time. This is explained in the Cue Timings topic.
  • MIB:
    MIB is "Move In Black". This is introduced in the What is MIB topic.
  • Mode:
    Cues can have different modes. They are described in the Using Cue Modes topic.
  • AE:
    AE is "Assert Effects". Read more about effects in the Effects section.
  • CMD:
    CMD is "Command". Commands (like the ones written the command line input) can be written in the cues. They will then be executed on the Master or Standalone station when the cue is triggered. Have a look at the Commands in Cues topic for more details.
  • CMD Delay:
    This will ad a delay between the triggering of the cue and the execution of the command.
  • Loop:
    Here it is possible to select a cue that should be looped to. Loops are described in details in the Looping Cues topic.
  • Ltime:
    This is "Loop Time". It is used with loops. Follow link above to learn more.
  • Lcount:
    This is "Loop Count". It is used with loops. Follow link above to learn more.
  • Path:
    Here it is possible to select a path for the cue transition. This is described in details in the Cue Path topic
  • Info:
    Here it is possible to add multiple lines of information to a cue. Please have a look at the Sequence Info View topic to learn more.
  • I.Delay:
    This is "Individual Delay". It displays the time for attributes that have individual stored delay times. This is discussed in the Cue timings topic.
  • I.Fade:
    This is "Individual Fade". It displays the time for attributes that have individual stored fade times. Follow the link above to learn more.
  • Forced Pos. Mode:
    This will open a pop-up that allows you to select a position mode for the cue. Learn more about position modes in the XYZ and Pan/Tilt in Sequences topic.
  • Preset types Fade / Delay:
    Each preset type has two columns called "Delay" and "Fade". These are discussed in the Cue timings topic.

 

Temporary Sequence Executor Sheet or Executor Editor

It is possible to open a temporary version of the Sequence Executor Sheet. It appears when an executor is edited.

This can be done by pressing the Edit key followed by one of the executor keys associated with the executor you want to edit.

The other way to edit a sequence assigned to an executor is by tapping the middle part of the mini executor, marked here with red:

Sequence Mini Executor - middle part marked

The editor that appears could look like this:

Executor Editor

This view has all the columns and rows as the Sequence Executor Sheet. It cannot be customized as the sheet.

It has a few buttons around that is not available in the sheet version:

  • Edit Previous Cue:
    This will edit the previous cue. Editing a cue means that values stored in the cue will become active values in the programmer. Values can be changed and the Update key can be pressed to update the cue. The cue that is being edited has a red frame around it. Pressing the Esc key will cancel the edit function - and close the pop-up.
  • Edit Current Cue:
    Same as above except the cue being edited is the current active cue.
  • Edit Next Cue:
    Same as above except it is the next cue that is being edited.
  • Cmd Disable:
    This will disable all the commands written in the "CMD" column. If the commands are disabled then the command text color will be red.
  • Test Cmd:
    This will execute the command written in the selected row.
  • Label:
    This can be used to give the sequence a label.

Notice that when this pop-up is open, then the Encoder Toolbar is different. It could look like this:

Encoder Toolbar - Edit Sequence - Page 1 Basics

The top row have some buttons and information.

Starting from the left there is an information "button" that shows the executor number, the sequence number and name, and the cue number and name. It is not actually a button. Next to this is a button that enters or exits the "Edit" mode - This will also change the Encoder Toolbar. Next are six buttons that can be used to control the sequence playback - Please read the Playing back cues topic for more on this. The last button in the top row is used to change between three different pages for the bottom encoder row.

The image above shows the first page - called "Basics". This gives access to change the: Trigger, Trig Time, Mode, and Loop. They are each assigned to one of the four encoders. The settings will change for the selected cues (rows).

The next page is called "Fade Delay" and could look like this:

Encoder Toolbar - Edit Sequence - Page 2 Fade Delay

The top row is the same. It is only the bottom encoder row that changes.

Now the encoders control Fade, Out Fade, Delay, and Out Delay.

The third page is called "Part cont." and could look like this:

Encoder Toolbar - Edit Sequence - Page 3 Part cont.

Now the encoders control Snap Percent, CMD, CMD Delay, and Info.

 

Edit the Sequence

The last way to see the cue sequence is by editing the sequence.

This is a command line action. The syntax is: Edit Sequence [number]

This can be done using the keys or by writing in the command line input.

The result is that the Sequence Editor pop-up appears. It could look like this:

Sequence Editor

This pop-up has two parts: The top part and the bottom part.

The top part is all the settings that can be changed regarding the sequence. They are all described in the What are Cues and Sequences topic.

The bottom part is all the columns and rows from the Sequence Executor Sheet. Everything with a gray background can be edited.


Select different version