• MA Network Switch
    • Introduction
      • Intended Use
      • Dangers caused by Electric Current
      • General Safety Instructions
      • System Requirements
      • SFP Transceiver Compatibility
    • Device Overview
      • Front Panel
      • Rear Panel
      • LED Indicators
      • Factory Defaults
    • First Steps
      • Unpack the Device
      • Install Mini-GBIC (SFP)
      • Installation in a Rack
      • Connect the Hardware
      • Set the IP Address on the PC
      • Access the Web Interface
    • Display Navigation
      • Groups View
      • Name View
      • Workload View
      • LAG View
      • Reset View
    • Ports / Groups
      • Change Port Description
      • Assign Groups to Ports
      • Edit LAGs
      • Edit RSTP
      • Edit Speed Setting
      • Change Group Name
      • Edit IGMP Snooping
      • Edit IGMP Querier
      • Edit Unknown Flooding
      • Change VLAN ID
    • Presets / Filters
      • Assign Presets to Ports
      • Apply Filters to Ports
      • Create New Presets
      • Update Presets
      • Create New Filter
      • View Filters
      • Delete Presets
      • Delete Filter
    • General Settings
      • Change Name
      • Change ID
      • Change DHCP Client
      • Change IP Address
      • Change Subnet Mask
      • Change Default Gateway
      • Change SNMP Status
      • Change Password
      • Update Firmware
      • Fallback to Backup Firmware
      • Get Switch Configuration
      • Edit Port Mirroring
      • Upload Switch Configuration
      • Reset Settings
      • Web Interface and grandMA2
    • Specifications
    • Support
    • Glossary
Select different version
 
There's no German translation of this page yet, so the English version is shown.
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 3.7

Factory Defaults

The following tables describes the factory defaults and what will happen to various settings when you reset the switch.

If you want to reset the switch, refer to General Settings - Reset Settings.

General Settings Defaults

This table describes the general settings defaults and what will happen to the general settings when you reset the switch.

Reset mode Items affected

Reset ALL settings to factory default by using the web interface

- and -

Hard reset with the menu button at the front panel

  • Reset IP address to the default IP address, displayed at the front end display.
    The default IP address is always the factory-given IP address per device.
  • Reset subnet mask to 255.255.255.0
  • Reset default gateway to 0.0.0.0
  • Reset password to "admin"
  • Reset name to "MA Switch"
  • Reset ID to "1"
  • IGMP Snooping "No"
  • IGMP Querier "No"
  • Unknown Flooding "Yes"
  • Disable filters
  • Disable speed
  • RSTP enabled
  • All ports are manage ports

Preset Defaults

The following lists describes what preset includes what filters by default and what will happen to the presets when you reset the switch.

Preset MA-Net2

The preset MA-Net2 contains the following filters by default:

  • MA-Net2 crtl IPv4
  • MA-Net2 data IPv4

Preset dot2-Net

The preset dot2-Net contains the following filters by default:

  • dot2-Net wing data
  • dot2-Net wing
  • dot2-Net wing ctrl
  • dot2-Net ctrl IPv6
  • dot2-Net data IPv6

Preset Art-Net

The preset Art-Net contains the following filters by default:

  • Art-Net

Preset MA-Remote

The preset MA-Remote contains the following filters by default:

  • HTTPS (dport 443)
  • HTTPS (sport 443)
  • HTTP (dport 80)
  • HTTP (sport 80)
  • MA Webremote (dport 8080)
  • MA Webremote (sport 8080)
  • MA Remote (7003)
  • MA Remote (7002)
  • MA Remote (7001) 

Preset MA-Net1

The preset MA-Net1 contains the following filters by default:

  • MA-Net

Preset grandMA2

The preset grandMA2 contains the following filters by default:

  • PSN
  • DNS
  • NTP
  • SSH (dport 22)
  • SSH (sport 22)
  • syslog
  • AVAHI
  • SNMP trap
  • SNMP
  • KiNet
  • Art-Net
  • sACN
  • MA-Net2 ctrl IPv4
  • MA-Net2 data IPv4
  • MIDI Show Control
  • VPU remote (dport 7005)
  • VPU remote (sport 7005)
  • VPU remote (dport 7004)
  • VPU remote (sport 7004)
  • HTTPS (dport 443)
  • HTTPS (sport 443)
  • HTTP (dport 80)
  • HTTP (sport 80)
  • MA Webremote (dport 8080)
  • MA Webremote (sport 8080)
  • MA Remote (7003)
  • MA Remote (7002)
  • MA Remote (7001)
  • Telnet (dport 30000)
  • Telnet (sport 30000)
  • Telnet (dport 23)
  • Telnet (sport 23)
  • nmbd (tcp)
  • nmbd (udp)
  • SMB (tcp 139)
  • SMB (udp 138)
  • SMB (udp 137)
  • NFS (tcp)
  • NFS (udp)
  • FTP
  • CITP MA
  • CITP
  • ShowNet
  • PathPort
  • ETC Net2

Preset sACN

The preset sACN contains the following filters by default:

  • sACN

Filter Defaults

The following tables describes what filters exist by default along with their frame match and what will happen to the filters when you reset the switch.

Filter Frame Match
PSN Standard IPv4 UDP dport 56565
DNS IPv4 UDP dport
NTP IPv4 UDP dport 123
SSH (dport 22) IPv4 TCP sport 22
SSH (sport 22) IPv4 TCP dport 22
syslog IPv4 UDP dport 514
AVAHI IPv4 UDP dport 5353
SNMP trap IPv4 UDP dport 162
SNMP IPv4 UDP dport 161
KiNet IPv4 UDP dport 6038
Art-Net IPv4 UDP dport 6454
sACN IPv4 UDP dport 5568
MA-Net2 ctrl IPv4 IPv4 UDP dport 29998
MA-Net2 data IPv4 IPv4 UDP dport 29999
dot2-Net wing data IPv6 UDP dport 30014
dot2-Net wing IPv6 UDP dport 30013
dot2-Net wing ctrl IPv6 UDP dport 30012
dot2-Net ctrl IPv6 IPv6 UDP dport 30010
dot2-Net data IPv6 IPv6 UDP dport 30011
MIDI Show Control IPv4 UDP dport range 6000-6020
MA-Net IPv4 UPD dport 9138
VPU remote (dport 7005) TCP dport 7005
VPU remote (sport 7005) TCP sport 7005
VPU remote (dport 7004) TCP dport 7004
VPU remote (sport 7004) TCP sport 7004
HTTPS (dport 443) IPv4 TCP sport 443
HTTPS (sport 443) IPv4 TCP dport 443
HTTP (dport 80) IPv4 TCP sport 80
HTTP (sport 80) IPv4 TCP dport 80
MA Webremote (dport 8080) IPv4 TCP dport 8080
MA Webremote (sport 8080) IPv4 TCP sport 8080
MA Remote (7003) TCP dport 7003
MA Remote (7002) TCP dport 7002
MA Remote (7001) TCP dport 7001
Telnet (dport 30000) TCP dport 30000
Telnet (sport 30000) TCP sport 30000
Telnet (dport 30001) TCP dport 30001
Telnet (sport 30001) TCP sport 30001
Telnet (dport 23) TCP dport 23
Telnet (sport 23) TCP sport 23
nmbd (tcp) IPv4 TCP dport 445
nmbd (udp) IPv4 UDP dport 445
SMB (tcp 139) TCP dport 139
SMB (udp 138) UDP dport 138
SMB (udp 137) UDP dport 137
NFS (tcp) TCP dport 111
NFS (udp) UDP dport 2049
FTP TCP dport 21
CITP MA TCP dport 30002
CITP UDP dport 4809
ShowNet UDP dport 2501
PathPort UDP dport 3792
ETC Net2 UDP dport 6107

 


Select different version