• dot2 User Manual
    • New in the Manual
    • Introduction
      • Intended Use
      • System Requirements dot2 onPC
      • Installation of dot2 onPC
    • What are...
      • System Colors
        • Command History
        • Executor
        • Values
        • Background
      • Programmer
      • Groups
      • Presets
      • Tracking
      • Cues
      • Executors
      • Chasers
      • Effects
      • Preview and Blind
      • Network
      • IPv6
      • DMX Tester
    • How to...
      • Turn the console on and off
      • Update the console
      • Add, patch, change, and delete fixtures
      • Save and load your show
      • Use the command line
      • Use Encoders in the onPC
      • Work with groups
      • Work with presets
      • Work with cues
      • Work with chasers
      • Work with effects
      • Connect nodes, wings, 3D and onPC
      • Use external input triggers
      • Use MIDI and MIDI Show Control (MSC)
      • Use the external screen
      • Use web remote
      • Reset the console
    • Keys
      • Align
      • At
      • Backup
      • Blind
      • B.O.
      • Clear
      • Copy
      • Cue
      • Delete
      • DMX
      • [dot]
      • Down
      • Edit
      • Effect
      • [Encoder]
      • Esc
      • Exec (Executor)
      • [Exec Flash]
      • [Exec Go]
      • Fix
      • Fixture
      • Flash
      • Full
      • Go-
      • Go- (Large)
      • Go+
      • Go+ (Large)
      • [GoFastBack] <<<
      • [GoFastForward] >>>
      • Goto
      • Group
      • Help
      • Highlt (Highlight)
      • Label
      • If
      • MA
      • Macro
      • Magic
      • [Minus] -
      • Move
      • Next
      • [Numeric keys]
      • Off
      • On
      • Oops
      • Page
      • Page+
      • Page-
      • Pause
      • Pause (Large)
      • Please
      • [Plus] +
      • Preset
      • Prev (Previous)
      • Prvw (Preview)
      • Select
      • Set
      • Setup
      • Speed
      • Store
      • Thru
      • Time
      • Toggle
      • Tools
      • Up
      • Update
      • View [Eye]
    • Views & Windows
      • Control Elements
        • Command Line
        • Encoder Bar
        • Executor Bar
        • Preset Type Bar
        • Title Bar
        • View Bar
      • Icons
      • Add New Fixtures
      • Backup
      • Beam Preset Type
      • Calculator
      • Calibrate Screens
      • Change Functions of Executor
      • Choose Clone Method
      • Choose Copy Method
      • Choose Delete Method
      • Choose Store Method
      • Choose Update Method
      • Clock
      • Color Preset Type
      • Command Line
      • Configure Slot
      • Control Preset Type
      • Cues
      • Dimmer Preset Type
      • DMX
      • Edit Cue Number(s)
      • Effects
      • Empty Executor
      • Enter Name for
      • Executor Bar
      • Executor Pool
      • Fixtures
      • Fixture Schedule Overview
      • Focus Preset Type
      • Gobo Preset Type
      • Global Settings
      • Groups
      • Help
      • Import Fixture Type
      • Key Backlight
      • Leaving Patch & Fixture Schedule...
      • Load Show
      • Macros Pool
      • Magic Speeds
      • MIDI Configuration
      • MIDI Monitor
      • MIDI Show Control
      • Network Interface
      • Network Protocols Configuration
      • Network Setup
      • New Show
      • Off...
      • Oops
      • Page Pool
      • Patch and Fixture Schedule
      • Position Preset Type
      • Presets Pools
      • Remote Inputs Configuration
      • Save Show As...
      • Select DMX Address...
      • Select DMX Ports
      • Select Fixtures ID(s)
      • Select Fixture Type...
      • Select Function for Remote Inputs Configuration
      • Select Function of Executor
      • Select Language...
      • Select Session Number
      • Select Station...
      • Select Trig
      • Select Type
      • Select View
      • Select View for External Screen
      • Select Wing...
      • Session Collision
      • Settings of Executor
      • Setup
      • Shapers Preset Type
      • Software Update via USB
      • Sound Input Configuration
      • Status and Messages
      • System Clock
      • System Information
      • Time defaults
      • Timecode Configuration
      • Tools
      • Video Preset Type
      • Virtual Playbacks
      • Window Settings
      • Wings
        • Wings & Nodes Diagnosis
    • Commands
      • >>> [GoFastForward]
      • <<< [GoFastBack]
      • - [Minus]
      • + [Plus]
      • Assign
      • At
      • Black
      • Blind
      • Call
      • Clone
      • Copy
      • Cue
      • Default
      • Delay
      • Delete
      • Dmx
      • DmxUniverse
      • Edit
      • Effect
      • Executor
      • Fade
      • Fix
      • Fixture
      • Flash
      • Full
      • FullHighlight
      • Go
      • GoBack
      • Goto
      • Group
      • Help
      • If
      • IfOutput
      • Invert
      • Label
      • Learn
      • Macro
      • MidiNote
      • Move
      • Off
      • On
      • OutDelay
      • OutFade
      • Page
      • Park
      • Pause
      • Preset
      • PresetType
      • Preview
      • Rate
      • Record
      • Release
      • Remove
      • Replace
      • Select
      • Selection
      • SetIP
      • SnapPercent
      • Solo
      • Stomp
      • Store
      • StoreLook
      • SyncEffects
      • Temp
      • Thru
      • Toggle
      • Top
      • Unpark
      • Update
      • View [Eye]
      • Zero
    • Hints for Operating
    • Error Handling
      • CrashLogCopy
      • CrashLogDelete
      • CrashLogList
      • Error Messages
    • Glossary
  • dot2 Quick Start Guide
  • dot2 3D
  • dot2 Release Notes
Select different version
 
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.5

Select DMX Address... Window

The Select DMX Address... Window is located at the Setup, tap Patch & Fixture Schedule.

1. For existing fixtures:

press and hold in the column Patch the cell from the fixture you want patch.

2. For new fixtures:

tap Add New Fixtures, tap at the last field Patch the Select button.

The Select DMX Address... Window opens.

Figure 1: Select DMX Address... Window

In this window, you patch fixtures and select a DMX address.

Below the title bar is the green edit line.

To jump to a DMX address, type the DMX address in the edit line.

The edit line displays also the selected DMX address from the table.

To confirm a selected DMX address, press  in the title bar. The window closes and you are back in the previous window.

To leave the DMX Address Window, press  in the title bar. You are back in the previous window.

Universe Overview

The universe overview is located on the left side of this window.

Figure 2: Universe Column

The universe column includes eight universes.

A selected universe has a green background and a white frame around.

The white dots inside a universe displays which DMX addresses are assigned.

If there are no dots in a universe, the universe is free.

Universe Table

The universe table is right beside the universe overview.

The table has four columns Address, ID, Fixture Type and Attribute.

Address: Displays the DMX addresses.

ID: Displays the fixture IDs.

Fixture Type: Displays the fixture types.

Attribute: Displays the fixture attributes.

If a fixture needs more than one DMX address, the first column is in a white font and all following are in a gray font.

A selected fixtures which is fitting in the selected DMX address has a green background.

Figure 3: Universe Table with fitting Fixture

A selected fixtures which is unfitting in the selected DMX address ha a red background.

Figure 4: Universe Table with unfitting Fixture

Encoder Bar Functions

Figure 5: Encoder Bar Functions - Select DMX Address...

Universe:
To select an universe in the universe column, turn the encoder left or right.

Test output value:
To set a test output value, turn the encoder left or right.
The DMX value is output directly to the stage. Thus, single DMX channels can be tested before they are patched. The value is automatically reset when leaving the dialog. 

Patch Offset:
To select a patch offset, turn the encoder left or right.
For more information about patch offset, refer to Add New Fixtures Window.

Address:
To select an address in the table, turn the encoder left or right.
To confirm the selected address, press the encoder.

 


Select different version