• dot2 User Manual
    • New in the Manual
    • Introduction
      • Intended Use
      • System Requirements dot2 onPC
      • Installation of dot2 onPC
    • What are...
      • System Colors
        • Command History
        • Executor
        • Values
      • Programmer
      • Groups
      • Presets
      • Tracking
      • Cues
      • Executors
      • Chasers
      • Effects
      • Preview and Blind
      • Network
      • IPv6
      • DMX Tester
    • How to...
      • Turn the console on and off
      • Update the console
      • Add, patch, change, and delete fixtures
      • Save and load your show
      • Use the command line
      • Use Encoders in the onPC
      • Work with groups
      • Work with presets
      • Work with cues
      • Work with chasers
      • Work with effects
      • Connect nodes, wings, 3D and onPC
      • Use external input triggers
      • Use MIDI and MIDI Show Control (MSC)
      • Use the external screen
      • Reset the console
    • Keys
      • Align
      • At
      • Backup
      • Blind
      • B.O.
      • Clear
      • Copy
      • Cue
      • Delete
      • DMX
      • [dot]
      • Down
      • Edit
      • Effect
      • [Encoder]
      • Esc
      • Exec (Executor)
      • [Exec Flash]
      • [Exec Go]
      • Fix
      • Fixture
      • Flash
      • Full
      • Go-
      • Go- (Large)
      • Go+
      • Go+ (Large)
      • [GoFastBack] <<<
      • [GoFastForward] >>>
      • Goto
      • Group
      • Help
      • Highlt (Highlight)
      • Label
      • If
      • MA
      • Macro
      • Magic
      • [Minus] -
      • Move
      • Next
      • [Numeric keys]
      • Off
      • On
      • Oops
      • Page
      • Page+
      • Page-
      • Pause
      • Pause (Large)
      • Please
      • [Plus] +
      • Preset
      • Prev (Previous)
      • Prvw (Preview)
      • Select
      • Set
      • Setup
      • Speed
      • Store
      • Thru
      • Time
      • Toggle
      • Tools
      • Up
      • Update
      • View [Eye]
    • Views & Windows
      • Control Elements
        • Command Line
        • Encoder Bar
        • Executor Bar
        • Preset Type Bar
        • Title Bar
        • View Bar
      • Icons
      • Add New Fixtures
      • Backup
      • Beam Preset Type
      • Calculator
      • Calibrate Screens
      • Change Functions of Executor
      • Choose Clone Method
      • Choose Copy Method
      • Choose Delete Method
      • Choose Store Method
      • Choose Update Method
      • Color Preset Type
      • Command Line
      • Configure Slot
      • Control Preset Type
      • Cues
      • Dimmer Preset Type
      • DMX
      • Edit Cue Number(s)
      • Effects
      • Empty Executor
      • Enter Name for
      • Executor Bar
      • Executor Pool
      • Fixtures
      • Fixture Schedule Overview
      • Focus Preset Type
      • Gobo Preset Type
      • Global Settings
      • Groups
      • Help
      • Import Fixture Type
      • Key Backlight
      • Leaving Patch & Fixture Schedule...
      • Load Show
      • Macros Pool
      • Magic Speeds
      • MIDI Configuration
      • MIDI Monitor
      • MIDI Show Control
      • Network Interface
      • Network Protocols Configuration
      • Network Setup
      • New Show
      • Off...
      • Oops
      • Page Pool
      • Patch and Fixture Schedule
      • Position Preset Type
      • Presets Pools
      • Remote Inputs Configuration
      • Save Show As...
      • Select DMX Address...
      • Select DMX Ports
      • Select Fixtures ID(s)
      • Select Fixture Type...
      • Select Function for Remote Inputs Configuration
      • Select Function of Executor
      • Select Language...
      • Select Session Number
      • Select Station...
      • Select Trig
      • Select Type
      • Select View
      • Select View for External Screen
      • Select Wing...
      • Session Collision
      • Settings of Executor
      • Setup
      • Shapers Preset Type
      • Software Update via USB
      • Sound Input Configuration
      • Status and Messages
      • System Clock
      • System Information
      • Time defaults
      • Timecode Configuration
      • Tools
      • Video Preset Type
      • Virtual Playbacks
      • Window Settings
      • Wings
      • Wings & Nodes Diagnosis
    • Commands
      • >>> [GoFastForward]
      • <<< [GoFastBack]
      • - [Minus]
      • + [Plus]
      • Assign
      • At
      • Black
      • Blind
      • Call
      • Clone
      • Copy
      • Cue
      • Default
      • Delay
      • Delete
      • Dmx
      • DmxUniverse
      • Edit
      • Effect
      • Executor
      • Fade
      • Fix
      • Fixture
      • Flash
      • Full
      • FullHighlight
      • Go
      • GoBack
      • Goto
      • Group
      • Help
      • If
      • IfOutput
      • Invert
      • Label
      • Learn
      • Macro
      • MidiNote
      • Move
      • Off
      • On
      • OutDelay
      • OutFade
      • Page
      • Park
      • Pause
      • Preset
      • PresetType
      • Preview
      • Rate
      • Record
      • Release
      • Remove
      • Replace
      • Select
      • Selection
      • SetIP
      • SnapPercent
      • Stomp
      • Store
      • StoreLook
      • SyncEffects
      • Temp
      • Thru
      • Toggle
      • Top
      • Unpark
      • Update
      • View [Eye]
      • Zero
    • Hints for Operating
    • Error Handling
      • CrashLogCopy
      • CrashLogDelete
      • CrashLogList
      • Error Messages
    • Glossary
  • dot2 Quick Start Guide
  • dot2 3D
  • dot2 Release Notes
Select different version
 
Hint:
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Version 1.3

Video Preset Type View

Table of contents of this topic

To go to the Video Preset Type View, tap Video in the Preset Type Bar.
- or -
Press and hold ma  and press 9, for preset type 9 (= Video).

The Video Preset Type View is fragmented in the smart view and raw video views. The raw video views are different, depending on the fixture type.

The video preset type view is only active if the selected fixture type has video attributes.

To open the video effects view, tap at in the title bar.

Smart View

The smart view is the first tab of the video preset type view.

Figure 1: Smart view

The smart view is optimized for video server with many attributes.

The smart view is fragmented in the areas:

  1. Displays the ChannelSets
  2. Displays the Features
  3. Displays the Attributes
Figure 2: Red color indicator

Red color indicates that this value comes from the programmer and you can store it.

Figure 3: Red frame indicator

The red frame indicates this value comes from the programmer.

Raw Video Views

The raw video views are located after the smart view

Figure 4: Raw video view
Important:
The video sliders works absolute. A tap on a video slider sets a new video value and does not follow the already set video  values.
The respective encoders works relative to the already set video values.

In the raw video view, you control the raw video values in natural values (0-100) of the selected fixture type.

Encoder Bar Functions

Figure 5: Encoder Bar - Video Preset Type

In the upper left corner of the encoder is the corresponding slider displayed.

To select the value, turn the encoder left or right.

To change the encoder speed to slow, press the encoder key encoder .

To change the encoder speed to ultra slow, press and hold the ma key and press the encoder key encoder .

To open the calculator, press the encoder.

 


Select different version