- dot2
- New in the Manual
- Introduction
- Intended Use
- System Requirements dot2 onPC
- Installation of dot2 onPC
- Getting Started Guide
- 1 - Introduction
- 2 - Physical setup and layout
- 3 - Create a new empty show
- 4 - Adding and patching dimmers
- 5 - Controlling dimmers
- 6 - Fixture view
- 7 - The programmer
- 8 - Making and working with groups
- 9 - Store a cue and play it back
- 10 - Making more cues in the cue list
- 11 - Adding LED fixtures
- 12 - Working with colors
- 13 - Creating presets
- 14 - External screen
- 15 - Adding moving lights
- 16 - Controlling moving lights
- 17 - Making more groups and Presets
- 18 - More about cues and playback
- 19 - A look at Blind, Preview and DMX tester
- 20 - Fun with macros
- 21 - Building chasers
- 22 - Building dynamic effects
- 23 - Connect to onPC, 3D, Wings and Nodes
- 24 - Happy programming
- What are...
- System Colors
- Command History
- Executor
- Values
- Programmer
- Groups
- Presets
- Tracking
- Cues
- Executors
- Chasers
- Effects
- Preview and Blind
- Network
- IPv6
- DMX Tester
- System Colors
- How to...
- Turn the console on and off
- Update the console
- Add, patch, change, and delete fixtures
- Save and load your show
- Use the command line
- Use Encoders in the onPC
- Work with groups
- Work with presets
- Work with cues
- Work with chasers
- Work with effects
- Connect nodes, wings, 3D and onPC
- Use external input triggers
- Use MIDI and MIDI Show Control (MSC)
- Use the external screen
- Reset the console
- Keys
- Align
- At
- Backup
- Blind
- B.O.
- Clear
- Copy
- Cue
- Delete
- DMX
- [dot]
- Down
- Edit
- Effect
- [Encoder]
- Esc
- Exec (Executor)
- [Exec Flash]
- [Exec Go]
- Fix
- Fixture
- Flash
- Full
- Go-
- Go- (Large)
- Go+
- Go+ (Large)
- [GoFastBack] <<<
- [GoFastForward] >>>
- Goto
- Group
- Help
- Highlt (Highlight)
- Label
- If
- MA
- Macro
- Magic
- [Minus] -
- Move
- Next
- [Numeric keys]
- Off
- On
- Oops
- Page
- Page+
- Page-
- Pause
- Pause (Large)
- Please
- [Plus] +
- Preset
- Prev (Previous)
- Prvw (Preview)
- Select
- Set
- Setup
- Speed
- Store
- Thru
- Time
- Toggle
- Tools
- Up
- Update
- View [Eye]
- Views & Windows
- Control Elements
- Command Line
- Encoder Bar
- Executor Bar
- Preset Type Bar
- Title Bar
- View Bar
- Icons
- Add New Fixtures
- Backup
- Beam Preset Type
- Calculator
- Calibrate Screens
- Change Functions of Executor
- Choose Clone Method
- Choose Copy Method
- Choose Delete Method
- Choose Store Method
- Choose Update Method
- Color Preset Type
- Command Line
- Configure Slot
- Control Preset Type
- Cues
- Dimmer Preset Type
- DMX
- Edit Cue Number(s)
- Effects
- Empty Executor
- Enter Name for
- Executor Bar
- Executor Pool
- Fixtures
- Fixture Schedule Overview
- Focus Preset Type
- Gobo Preset Type
- Global Settings
- Groups
- Help
- Import Fixture Type
- Key Backlight
- Leaving Patch & Fixture Schedule...
- Load Show
- Macros Pool
- Magic Speed
- MIDI Configuration
- MIDI Monitor
- MIDI Show Control
- Network Interface
- Network Protocols Configuration
- Network Setup
- New Show
- Off...
- Oops
- Page Pool
- Patch and Fixture Schedule
- Position Preset Type
- Presets Pools
- Remote Inputs Configuration
- Save Show As...
- Select DMX Address...
- Select DMX Ports
- Select Fixtures ID(s)
- Select Fixture Type...
- Select Function for Remote Inputs Configuration
- Select Function of Executor
- Select Language...
- Select Session Number
- Select Station...
- Select Trig
- Select Type
- Select View
- Select View for External Screen
- Select Wing...
- Session Collision
- Settings of Executor
- Setup
- Shapers Preset Type
- Software Update via USB
- Sound Input Configuration
- Status and Messages
- System Clock
- System Information
- Time defaults
- Timecode Configuration
- Tools
- Video Preset Type
- Virtual Playbacks
- Window Settings
- Wings
- Wings & Nodes Diagnosis
- Control Elements
- Commands
- >>> [GoFastForward]
- <<< [GoFastBack]
- - [Minus]
- + [Plus]
- Assign
- At
- Black
- Blind
- Call
- Clone
- Copy
- Cue
- Default
- Delay
- Delete
- Dmx
- DmxUniverse
- Edit
- Effect
- Executor
- Fade
- Fix
- Fixture
- Flash
- Full
- FullHighlight
- Go
- GoBack
- Goto
- Group
- Help
- If
- IfOutput
- Invert
- Label
- Learn
- Macro
- MidiNote
- Move
- Off
- On
- OutDelay
- OutFade
- Page
- Park
- Pause
- Preset
- PresetType
- Preview
- Rate
- Record
- Remove
- Replace
- Select
- Selection
- SetIP
- SnapPercent
- Stomp
- Store
- StoreLook
- SyncEffects
- Temp
- Thru
- Toggle
- Top
- Unpark
- Update
- View [Eye]
- Zero
- Hints for Operating
- Release Notes 1.2
- Error Handling
- CrashLogCopy
- CrashLogDelete
- CrashLogList
- Error Messages
- Glossary
- dot2 3D
New help version
The help version you selected belongs to an older software version. You may want to view the latest help version.
Fixtures View
Table of contents of this topic
To go to the Fixture View on screen 1: Press Fixture on the console.
To go to the Fixture View on screen 2 or all further screens: Tap Fixtures on the view bar.
In this view you see all imported fixtures, attributes and their output.
If preview is active, you see the values.
Swipe to select and deselect fixtures.
To switch between the symbol view 
, the sheet view 
, or to one of the five layout views 
, tap on the respective icon in the title bar.
To pin the view and deactivate the dynamic view mode, tap the pin 
.
The fixtures types and values can have different colors. For more about colors go to system colors.
Symbol View
You get to the fixture symbol view with a tap on the symbol view icon in the title bar of the fixture view.
This is a graphical layout of the patched fixtures. The symbol view displays always the playback output.
The fixtures are grouped in fixture types.
There are different symbols in the symbol view, depending on the fixture type.
To see the fixture names and to see the colors and gobos if the dimmer is closed, press and hold 
.
Fixture Symbols
All fixture symbols have in the upper area the fixture ID and the orange dimmer bar below.
The dimmer bar is a graphical view of the dimmer value.
Displays additional to the dimmer bar the dimmer value of 50 % in red (= programmer values), and 0 0 for the position of pan and tilt values.
Displays additional to the dimmer bar the dimmer values of 100 % in red (= programmer values), and 175 -33 for the position of pan and tilt values, and the gobo wheel.
Displays the current color and the dimmer values. For more information, see value colors.
Sheet View
To go to the fixture sheet view tap the sheet view icon in the title bar.
In the fixture sheet view are all patched fixtures, and their values and attributes, in a numeric order of the fixture ID.
In the first column is the fixture ID displayed. In the second column is the fixture name displayed. Those two columns are fixed.
After the fixture name column are the attributes displayed, in the same order like the preset type bar.
If you use a preset, the name of the preset is displayed instead of the value.
To adjust the column width, press and hold the vertical column line next to the column header and move the column.
To edit attribute values in the fixtures sheet view, select a fixture and tap and hold the value cell from the attribute. The calculator opens.
To learn more about the different colors in the sheet view, refer to value colors.
If blind is on, the blind values are only visible in the sheet view. For more information, see Blind key and Blind command.
Layout View
To go to one of the fixtures layout view, tap at one of the layout icons .
By default, the fixtures layout view is empty. For more information about the fixtures layout view and how to arrange them, see Getting Started Guide - Fixtures View.
Encoder Bar Functions
Scroll:
To scroll in the fixtures view up or down, turn the encoder left or right.